time

  1. Bas

    Glue temperature affect open time?

    I am finally getting ready to glue up a little magazine rack. Only took four dry fits. All I need to do is give it a final sanding and it's ready to go. The whole thing is joined via dowels. A grand total of 46. I need to put glue in the holes, glue on the dowels, glue on the sides, fiddle it...
  2. JackLeg

    Adirondack Chairs-One More Time!

    (Coles may eat my lunch for this, but I'm kinda stumbling here trying to post the photo of these new chairs we made for Ivey and wife. Here goes one more time) http://www.ncwoodworker.net/pp/data/607/medium/Cypress_Adirondacks_wTable.JPG
  3. G

    First time all knotted up

    I've made several two ring knot pens before but hadn't made a four ring knot. I didn't want to make one 'til I knew I could do it repeatedly with the same accuracy. So, having set up a jig, I had a go at it: This is a Gold Tn cigar with figured hard maple and Sapelle having a CA finish and...
  4. J

    Raleigh KD Run#2 - Good Time

    I just got back from HF in Raleigh, picked up my QSRO from Jeff. The wood looks real good, I can't wait to see how it planes out, Thanks Jeff. I finally got to meet a bunch of you, and you seem like really great guys, it nice to put some names with the screen personalities. Anyway, I had a...
  5. WoodWrangler

    CNC Time

    My wife and I are looking for someone in the Charlotte (or surrounding) area who may have a CNC machine that we could use (or rent some time on). The project: As some of you know, she has a side business renting out large yard signs (www.storksandsigns.com). The signs are 8ft by 4ft and are...
  6. NCPete

    some time off?

    really not so much 'time off' as life will be too busy over the next several days to get to involved here. Intermediate Accounting midterm today(maybe 5 hours of work?) followed by doing the regular coursework for this past week, then squeezing in 12 hour days at work for the next few days, as...
  7. lottathought

    Time to play..NAME THAT WOOD

    Things have been moving along in the Antiques project that I have been in. I really like the way that the end table is coming along (Gonna have to do a before-after when it is done)...... and the clock looks great also. I have hit a little snag however. I have a bookcase...circa...
  8. lottathought

    Time to get started

    As I said earlier, I am now starting to restore some furniture from my grandparents house. I had planned on getting started last week but my Explorer had different ideas. :BangHead: :crybaby2: :BangHead: :eusa_booh ... So...I have now dropped and changed the front differential and have changed...
  9. G

    First time demonstrating

    Norm B (Bluewing92) came by the shop tonight to visit and have me show him how to make a pen. We spent an enjoyable evening while we worked through the selection, design, and production stages of pen-making. Tonight, I did the actual production; next time Norm makes the pen while I offer advice...
  10. R

    First time with wicker

    My daughter is active in her church and therefore carries a lot of food to different functions. I built this for her. It's made of SYP with wicker to cut down on the weight. The joints are dovetailed, locking miter and lose tenons. The bottoms are 3/16" oak ply. It's stained with Minwax Golden...
  11. J

    Desk for me this time

    Anyone got plans for a 5' x 30" desk? I was thinking about modeling it after my daughters http://www.ncwoodworker.net/forums/showthread.php?t=5198 but it'll be for a right handed person or was thinking about putting the chair hole in the middle, with a set of drawers on each side. I would like...
  12. A

    long time woodworker - new time member

    Hi Gang, Just found the site there. I'm located in Raleigh where I do custom furniture, cabinetry and wine cellars. I'm an active member of the Cabinet Makers Association and am looking foward to being a member here. Art
  13. Splinter

    Just a swingin' and Time is ticking....

    This is a swing I made for my grandson. I bought a plan but didn't like it so I made my own. The wood is cypress. A happy customer. :lol: :lol: A couple of cherry clocks. I have not made many small projects like this. The glue up is kind of tedious. There are 9 pieces of wood in...
  14. T

    Shop time today!!

    I got in some time in the shop this morning and got a few things done. I ordered this sign from work. It is 2 sided and comes with a neat cast hand saw looking bracket to mount to the wall with. I received the Wixey saw gauge for my birthday and installed it today (have not used it yet)...
  15. lottathought

    Time for a little chuckle

    Tonight was the night. My first solo pen. I had assisted DaveO on one...and he made sure I did not go flat..much like in a Tandem jump. I did learn a lot...and developed a few questions..but now is a time for trial and error. So here is the finished product..yes, I see a ton of errors too.
  16. lottathought

    Time to show my ignorance

    I am almost ashamed to ask this. On the other hand, if I do not ask at some point, I suppose that I will never learn. :eusa_booh Anyways... I have always done more refinishing and remodeling..so close cuts in wood were usually good enough. I knew that furniture would be a different story. And...
  17. JRD

    Time for something new

    Haven't had the time to do all the turning I'd like to, but today decided I'd make some time. I know several others have done bottle stoppers, but this is my first attempt. I'm not sure the proportions are exactly where they should be, but the spalted, red oak I used makes up for a lot of...
  18. woodguy1975

    Moak Restoration/Upgrade Complete - Pics time

    Well, my goal was to complete the 36" bandsaw rebuild/upgrade before I leave again for China. All bearings have been replaced, brakes replaced with electronic braking, new lower door, and new blade guard fabricated by me. A picture is worth a 1000 words so it is on with the pictures. For the...
  19. Jim Murphy

    Thinking cap time...

    I'm seeking the best way to cut 6" S&D PVC with SQUARE ENDS for my dust collection system. I have tablesaw, bandsaw, Compound Miter Saw, Sawzall, skilsaw, jigsaw, dozuki, hack saws, dull handsaws, a pocket knife, various files, a grinder, coping saw, utility knife, scissors, PVC cutter w/ 1" max...
  20. dino drosas

    Tool Gloat, Too Much Time On My Hands

    When I took a rocking chair class from John Richards, I used his 20" disc sander and was amazed how fast and accurate it was. Told John I was now spoiled and would have to get one of these. Found this one on Ebay, brand new in the box and at at GREAT price. Coundn't pass on it. Probally a good...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top