time

  1. blbradford

    Clocks: Time for some "other" project

    Last Christmas I made some clocks for presents and made one for myself as well. yes that's me in the pendulum picture I would be interested in your opinion of which one YOU like the best. :eusa_danc Bruce :occasion1
  2. sawduster

    Log in time out

    Being a slow typer I am used to having to log back in if I create a post of any substantial length due to the log in time out. However, this morning after typing my ( long ) post I went to add pics and got a message that said i had no gallery available as an " unregistered user ". In the past I...
  3. Phil S

    WorkSharp 3000 one last time

    I just received the two units I ordered. I already have one so --- These two are going up for auction to support the site, I have $74 each into these so anything above that will go to the site. I probably should have posted this in classified but the messaging system within...
  4. J

    Time Flys When You Are Having Fun!

    I doing a a dust collection job for a client. Built and installed the cyclone, ran the piping, and installed the blast gates. Now I'm working on DC hoods for several machines, one of which is a Shopsmith lathe he uses with a sanding disk. I remembered seeing an article a couple years back in...
  5. ScottM

    Still Time to Pre-Order your 2011 Calendar

    Ladies and Gentleman there is still time to order your 2011 NCWW calendar at the pre-order price of $17.00 delivered. They make wonderful gifts for friends, family and even yourself. To ensure delivery for Christmas you must place your order by December 15th. See the ad on the right side of...
  6. Bigdog72

    Clamping time

    This is a general question regarding how long one should keep a glue up in the clamps. I know that type of wood, ambient temperature, type of glue and about a thousand other things factor in. What I am looking for is a general rule of thumb for "cooking time" to coin a phrase from Norm. My...
  7. ScottM

    It is good will lathe time

    The heat of summer has past. The cool temps and the turning leaves also triggers the need for all good wood workers to make saw dust. There is no better time to take a spin with the NCWW good will lathe. For the newer folks the good will lathe is a complete package including a Rikon lathe...
  8. hpetty

    I'm back... this time for real

    About four years ago, while living in Charlotte, I was very active in this group. Then followed a two year stint in Florida and a move to Raleigh - during which time I was "shopless" with my all of my equipment packed up and in storage. Now I finally have a chance to set my shop back up. Just...
  9. D

    Cooler Weather = Shop Time

    Well, I've been waiting on summer to cool down so I could get out and work some. Yesterday and today I managed to get in a little shop time and almost completed a couple projects. :eusa_danc:banana: Remember this one from back in March? Well, here's a portion of it; actually the bottom most...
  10. FredP

    clock time

    cut offs make some interesting stuff.:gar-Bi
  11. Rob

    Long time, no gloat

    Now I have a gloat, This was waiting for me when I got home from work yesterday. I ordered it from CPO Wednesday and it arrived yesterday, talk about fast shipping, and only $4.95 for shipping. Steve Coles turned me on to CPO, I was very impressed with their prices and speedy delivery. All...
  12. TracyP

    Important Staff and BOD Conference Call Updated Time 8:00 PM

    An all important conference call will be held on Monday evening August 2nd at 8:00 PM. All of the Staff and the Board of Directors are welcome and encouraged to take time to participate in this call. The agenda is really simple and will be restricted to this one item: Where we are. Although...
  13. scsmith42

    It's that time...

    for me to say goodbye. I have thoroughly enjoyed working with each and every one of you this past year, and I sincerely appreciate the way that y'all have allowed me to participate in the operations of the site. Best of success to you in the coming year, and as an "ordinary member" (soon to...
  14. scsmith42

    The time has come...

    for me to say "goodbye" to this great team of Mods and Admins. I've had a great year being on the BOD at North Carolina Woodworker, and watching y'all volunteer your time and abilities to keep this site running smoothly has been a great experience and inspiration. I wish all of you the best in...
  15. froglips

    Shaping pine or time travel, which is more likely?

    Ok, I am considering joining the IHSYP International. (I Hate Southern Yellow Pine). The HOW (Hillsborough Orange Woodworkers Meetup) is furiously working on the Popular Woodworking Skansen Bench. We have big inside and outside radius curves in the legs that needed shaping. We sawed...
  16. S

    Time for a table saw

    In the next week or two I want to purchase a table saw. I have not owned one in a very long time and it was just a $100 or so saw new. I'm not opposed to a portable but would prefer something more solid like a hybrid. I do want to be able to do 3/4 dado cuts and the kicker is I would like to try...
  17. ScottM

    It is goodwill lathe time

    BryanS has had his share of fun but it is now time for someone else to try it. For the newer members the lathe is a complete turning system. Includes, Rikon lathe, a full set of quality turning tools, grinder, sharpen jigs, live center, chuck, pen mandrel and instructions. BryanS is adding to...
  18. Travis Porter

    It's that time of year again

    Yes, it is. I have come out of remission and have woodguy disease..... The toyls are on their way!!!!!:eusa_danc :banana::banana::banana: :occasion1:occasion1
  19. TracyP

    Is it time for a statement from the Webmaster...

    This thread is in relation to the off topic forum. After a daring and deliberate post from Ken Massengil in the off topic forum that was in blatant disregard of policy, I am thinking we need to post a stern warning to the members about proper posting to the off topic forum. And the...
  20. D

    More Shop Time

    Decent weather equals shop time for me. Had to solve a small dilemma though. I've had this Maple stump sitting on the porch/shop for over a year now drying. Admittedly not the ideal environment for that but that was the only place for it at the time due to the size and weight. Now way I could...

Our Sponsors

LATEST FOR SALE LISTINGS

Top