working

  1. Trent Mason

    What are you working on?

    I love this time of year. It starts to get cold and everyone starts spending more time in the shop and working on Christmas presents. So what are you all working on? :dontknow: I'm almost done with this cutting board. It's walnut and maple. Still need to sand it and put a little roundover...
  2. rick7938

    Working with Cedar

    The daughter of our closest friends wants me to make her a Hope Chest from real cedar. I hate working with the stuff because it gums up my tools and is so brittle. Therefore, I have never dedicated a lot of time learning to work cedar successfully. I am planning to use frame and panel...
  3. froglips

    Donate button not working....

    Before I beat my head against the computer wall, hopping this isn't a surprise. I went to the link "Donate to NC WW", clicked on the donate button and was taken to a lovely page full of NCWWer Smilies. I recall something was turned off for the Raffle payment, hoping this is related. If...
  4. M

    Working with Walnut - LOTS of questions

    I have a good supply of walnut that I'm going to be making several things from. While I'm not a complete idiot, I'm not a master craftsman, by any stretch of the imagination, either. Here's the schedule of things I'm planning on making.... Basic 1x3 and 1x6 trim A custom "desk" that is...
  5. S

    My first wood working youtube video

    This weekend I finally got some time to mount my router on router table. Mounting a router on router table maybe a very simple exercise for many of us but it could be a tricky one for newbees. I decided to record my adventure. My wife helped me with the camera work for this youtube video...
  6. C

    $10 for working craftsman RAS on Clt CL

    http://charlotte.craigslist.org/tls/1313443907.html Not mine. I'd get it myself but can't get to Rock hill soon enough and I figure it will go quickly at that price.
  7. Truefire

    Question about working Spalted Woods.

    Hey guys i have worked spalted woods before but this time around i managed to harvest a red maple myself that has a lot of colored zone lines which i plan on turning eventually. So needless to say i have somewhat larger quantity of it than i normally do. Thus generating a concern for me. I...
    • Truefire
    • Thread
    • question spalted woods working
    • Replies: 15
    • Forum: Wood
  8. N

    Hello All, new to wood working

    Hello All, I'm definitely a newbie when it comes to woodworking, but my new father in law has been pointing me in the right direction in this new hobby/addiction. As for my tools I'm slowly starting my collection. I have the basics a compound miter, jigsaw, circular saw, drill and a router. In...
  9. CrealBilly

    Working in the shop

    A wise man once said if you enjoy what you are doing it's not considered work (or something like that) so do you consider "working" in the shop, work?
  10. Mike Davis

    What are you working on?

    I'm building my first real cabinet. I have the face frame done and starting on the 4 doors, then will build the carcass. That's probably backwards but I don't know better. That's my excuse and I'm sticking to it! So, what are you doing? I haven't seen many WIP lately. If you don't want...
  11. bluchz

    Working with Dogwood?

    Has anyone ever done this? any tip, hints, or should i just not try it?
    • bluchz
    • Thread
    • dogwood working
    • Replies: 11
    • Forum: Wood
  12. Mike Davis

    Wood Working Library

    Lots of public domain PDF books on wood and metal work Some Disston saw filing books! http://www.evenfallstudios.com/woodworks_library/woodworks_library.html
  13. peteb301

    Remember me not working

    Could be my problem but since updating to IE 8, remember me dosen't appear to keep my sign on info. Maybe a function somewhere in IE 8.
  14. DaveO

    Working on the Honey-do list

    After I made a small three shelf unit for our bathroom my wife mentioned that it would be nice to have a shelf where the towel bar is over the throne, but with a towel bar too. Sure no problem put it on the list. Here is what I came up with. I was hesitant in posting it because it's such a...
  15. jonnyfontaine

    finally put some pictures up of what i've been working on

    i am not sure if the pictures will work.. but if they do they are a maple topped and eucalyptus topped solid body guitar, and then a picture of both after they were stained, a picture of the eucalyptus close up, the backs of both guitars, and a picture of my signature inlay... thanks
  16. toolman

    Charlotte Merchandise Mart (The Wood Working Show)

    This was PM'd to me by Gotcha6. For more info go to: http://cms.thewoodworkingshows.com/cms/ or http://cms.thewoodworkingshows.com/cms/Shows/CharlotteNCMar2022/tabid/71/Default.aspx
  17. M

    old wood working machines

    http://charlotte.craigslist.org/tls/1041817291.html Looks heavy Frank
  18. woodArtz

    File Upload not working

    I'm trying to upload a doc and the link come back as page not found.
  19. Lab with Mallard

    Lab with Mallard

    Labrador Retriever returning to its master with with the quarry.Made from 1/8" Maple.Framed in non reflective glass.The frame is trimmed in a gun metal color which is speckled with rust color.
    • 299T
    • Media item
    • bird dog framed glass gun hunting pet working
    • Comments: 0
    • Category: Member Galleries
  20. J

    DQ not working

    I checked to see if I was DQ'd Friday night and was, but when I went to Klingspor on Saturday I received no discount. I only bought a $20 book this time so it could have been worse. Is there any problem with the lists being sent out ? Thank you

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top