working

  1. W

    Working on the Shop instead of in the shop

    So i know how everyone loves pics, and as i have not uploaded any, I decided to snap a few while i worked on my shop this weekend. Once I am done I will get a big pic of the inside as i will want some input on tool placement. Here is the outside of the shop Here is the inside while we were...
  2. nelsone

    Working with melamine - need advise

    I am building a simple stand for a flat panel TV for some clients and I need a little advice. This unit is being designed to fit into an existing shelf unit that was built to surround a large projection TV. I am using black melamine, primarily because they want this quick and black. The unit...
  3. NZAPP1

    First Wood Working project in 1 year completed

    I started this project 1 year ago. Then I started a new job and had to relocate. Next I had to build a patio, shed and fence in the yard. Then I got to work on the shop and now I finished it :eusa_clap
    • NZAPP1
    • Thread
    • completed project wood working year
    • Replies: 2
    • Forum: Woodturning
  4. Threejs

    Who here is working on the lumberjock winter challenge?

    I am. I am almost done with the box, and have plans made for the 2x4 challenge. Just hope I can get done by end of Jan.
  5. MikeL

    [Problem-Main Site] My thumbnail links are not working???

    Status: Entered Assigned To:: Unassigned ===================================== I need some help getting my thumbnail image links working within my most recent post. I went back to Monty's tutorial, but it seems that the information below the photos is somewhat different than it use to be...
    • MikeL
    • Thread
    • links problemmain thumbnail working
    • Replies: 4
    • Forum: Help Desk
  6. DaveO

    What I've been working on lately...Mo' pics

    Over the past two weekends, at least Labor Day and all this weekend I have been working on completing a commission that I got a while ago. They will be two cages for Bearded Dragons on cabinet stands. I have completed the cage part sans the finishing (and assembly of the second one) The wood is...
  7. R

    Working with Lyptus

    Has anyone done any work with Lyptus? I've read a couple of reviews of the stuff that rave about its looks and how easily it can be worked and finished. Supposed to look kind of like mahogany. And it's grown in sustainable / managed forests. I looked at prices listed on Steve Wall's lumber...
  8. pslamp32

    Working with stain...

    Did a small project last week using some stain (oil based). What is the best way to finish over stain without lifting the stain while brushing? I used dewaxed shellac under the stain. Should I have used shellac on top of the stain before topcoating? Also, should I use the sealer shellac or...
  9. Jim Murphy

    Working from plans

    I'm building a hand tool chest (out of junk wood) from an article with plans in a "free issue" of Woodsmith that arrived unsolicited in the mailbox. Now, I shan't disparage that for which I have paid nothing, but it has been a bit of an effort to work with the plan. This particular plan contains...
  10. cskipper

    Just so you know I have been working...

    Here's a Christmas ornament (yes, I know it's passed) that I cut. I am going to try to put a finish on some other pieces today and will post if I get them done. I just hadn't posted anything for awhile.
  11. williams130

    My Delta DP350 Drill Press not Working

    Hi Friends, I used my drill press one day with no incident then the next day I pushed the button and.......nothing! :cry: I checked the circuit and it is fine. My DC works plugged into the same outlet. The DP350 has a built in light that is working fine but when I push the ON button to start...
  12. J

    Wood Working magazines

    Check MagazinePriceSearch.com tracks the lowest prices on 2639 magazine subscriptions! We find the best prices on magazines! before ordering any magazines. They do a price search each day. The best deal often changes. First of the week, I renewed my FWW for $67 and change for three years. That...
  13. C

    Working on Photography

    I am working on the photographic skill. Since I have none, I figure I can go nowhere but up. Opinions welcome, both good and bad, constructive criticism also solicated. Thanks for looking Gold sycamore Sierra: Sterling silver holly baron fountain: Gold cocobolo designer slimline:
  14. DaveO

    New lathe working alright

    I put my new HF lathe through some paces this weekend. Turned a Cherry bowl and a couple of pens. The HF lathe is like a Cadillac to me after what I was working on. I highly recommend it to budget minded beginning turners. But the greatest thing was my new Oneway Talon chuck. I realized that I'm...
  15. P Crews

    Tablesaw quit working

    I had an unhappy start to my morning. My tablesaw won't work. It's a Craftsman older model 10" contractor tablesaw. I turned it on and the motor whined but the blade didn't turn. I unplugged it and cleaned it out with the shopvac and airhose. The blade will move freely when turned. I...
  16. SteveColes

    Working with acetone

    1. When spilled on the floor wipe it up immediately. If you stand in the puddle, when you try to walk around, the softened soles of your sneakers will feel like you are walking on a sticky surface and will mess up your nice wooden floors. 2. After cleaning up the spill, don't stand in that...
  17. J

    Boo, Hoo No Wood working Show in Charlotte

    :BangHead::eusa_boohI got a card in mail today to get a discount on admission to WW show in Buffalo, Sept 29- Oct.1 Went to their website to check on date for Charlotte show and there is NONE. Closest shows are Baltimore in early January, and Chantilley(Washington DC, out by Dullies) March 16-18.
  18. G

    working my way up

    Below are a couple of bowls? I have made. Both are about 2 1/2 " diameter and about 1" tall. The one on the left is mahagony and the right is bradford pear. I guess that small may be something other than a bowl but at least the idea is the same.
  19. L

    Working with pine

    I see some beautiful pieces of furniture made with pine however when I have used pine in my dust system it clogged up the pipes. I have recently removed the copper wire, maybe the pine wouldn't be a problem now. Thought I would get some feedback from you guys and girls as to what your...
  20. B

    Wood Working Shop Auction 3/17

    A complete wood working shop and lumber. Shelby, NC 3/17. Go to Godley Auctions on line for details. Happy Hunting!:-P

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top