made

  1. KC7CN

    If it's made out of...

    Plastic, it's going to break! I call this a rule, some may simply call it a saying, but for me, it's always true. This rant is about my DeWalt DW618 Router. The nifty push button spindle lock consists of a plastic button with a small finger (stub, protrusion...), a stainless shaft, and a...
  2. Bas

    The incredible binary marble adding machine (made out of wood!)

    Big title, small post -> http://woodgears.ca/marbleadd/ Watch the video.
    • Bas
    • Thread
    • adding binary incredible machine made marble wood
    • Replies: 18
    • Forum: General Woodworking
  3. Douglas Robinson

    I sort of sold something I made!?

    At work two weeks ago they were having meeting all week. They wanted a "talking stick." Something to pass around, and you could onld talk while holding the stick. Well, they gave me a lousy looking stick someone had found and asked if I could fix it up. Instead, I brought in the the mallet I...
  4. 1950's 4 Wheeler

    1950's 4 Wheeler

    This farm-made mowing machine was built by my uncle in the early 1950's. A majority of the parts came from war surplus army trucks. There is an article about it, in the June 1953 issue of the Country Gentleman magazine. The mower has 4 wheel drive, 4 wheel steering, and independent 4 wheel...
    • KC7CN
    • Media item
    • farm machine made mowing
    • Comments: 0
    • Album: Miscellaneous Pictures
  5. johnpipe108

    Jewel Casket made from molding.

    I made this jewel casket from molding. The wood is unknown, but might be walnut sapwood, as it has a light, cream-colored interior when freshly milled, but the exterior is predominately a light, walnut-brown, with some light streaks through some of the wood from the batch. This was more of the...
  6. D

    made trip to jackson lumber for ash plywood...

    and what a place. he has about any type of plywwod, rough cut lumber and even flooring. its not a store tho, its a storeage warhouse. he has amazing prices. he's a wholesaler, so he doesn't let people wander around looking.also, u need to call him to set up time to pick up lumber. the ash i...
  7. Miter Sanding

    Miter Sanding

    Sanding miter on right side of jig.
    • KC7CN
    • Media item
    • belt jig made miter sander shop
    • Comments: 0
    • Album: Belt Sander Dust Collection
  8. Miter Jig

    Miter Jig

    Sand mating miter on left, than right, side of jig for perfect joint.
    • KC7CN
    • Media item
    • belt jig made miter sander shop
    • Comments: 0
    • Album: Belt Sander Dust Collection
  9. T

    Need 2 table legs made.

    Can any one help out this lady. I can't get to it until the end of January. I have a pdf. file of what she needs. I will e-mail to who ever wants. The one she needs is 36" tall. The top square area is 3-1/2" tall I only need two legs, constructed out of Oak, to complete a kitchen...
  10. Feather Board

    Feather Board

    Shop-made feather board, with shop-made knobs.
    • KC7CN
    • Media item
    • board feather made shop
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  11. toolman

    Butcher Block I made first of this year

    Made this Feb. 2007, End grain Butcher Block made out of Hard Maple. Size is 4" x 24" x 36" Just a little over 100#.. I Have a 13" plainer so I made it in 3 parts 8" wide Plain it to 4". Used 4 biscuits to join together, did a little sanding, Then oil it with butcher block oil, and shipped it...
  12. mshel

    Shop made skew chisels

    Made this pair of skew chisels today. I obtained the blanks from a fellow on Wnet. They are actually driver blanks which were made for Dewalt staple guns. I ground the angle ( 30 deg) and then ground the bevel ( 25 deg) on the tormek. I turned the handles out of some bloodwood that C Powell gave...
  13. M

    Need 3' cabinet made to match kitchen

    In the middle of planning to upgrade our 20 year old kitchen. Currently have honey oak cabinets that are in pretty good shape and have a timeless look (partial coverage). Ideally we'd like to reuse the existing cabinets and reconfigure the kitchen. To do so, I need about a 3 foot cabinet made...
  14. S

    Need some cabinets made!

    Hello folks. I am new here, a friend referred me to this site to help locate someone for a project at my house. I have a room upstairs with a walk-behind bar and I am interested in having a built-in piece of cabinetry installed to house my various Jack Daniels bottles that I have collected...
  15. walnutjerry

    Made to Order

    Just completed a game table for a client of Wooden Stone Gallery. Pictures are not great but you will see the jist of it. Hard maple was the wood of choice. The top is 28"x28" with the game board being 16" square with 1/2" cherry banding around the playing field. Criticism welcome.:-)...
  16. ChrisMathes

    New Chisel Plane (Made in the USA)

    :wink_smil I've been wanting to make a chisel plane for a long time now and finally got around to making it. It was easy, but the cool part was picking the wood to make it with...and it's for me!!! The plane is a solid piece of claro walnut that I shaped to fit my hand. The cap is made from...
  17. pslamp32

    Craftsman TS, imported or US made?

    I've got an old Craftsman contractor's saw. I'd like to buy a PALS http://www.in-lineindustries.com/saw_pals.html kit for it but I don't know how to tell if it's US made or not. Does anyone know how to tell? Thanks!
  18. MikeH

    I made some more wood dizzy last night...

    And here is the result. The pen is for my brother-in-law (and best friend in high school). It is Macassar Ebony and I'm pretty pleased with the results. :eusa_danc I hope he likes it. Let me know what you think.
  19. johnpipe108

    PC base for Bosch router made from scrap

    My Bosch router kit comes with 3 Bosch bushings, but I needed a larger one and Woodcraft had these nice, shiny, BRASS PC bushings (I have a weakness for shiny brass :rolf: ). I made a suitable base from scrap Masonite by copying the Bosch plunge base on the router table. A recess for the bushing...
  20. johnpipe108

    Woodwind prototype made in MDF; WIP

    My Irish Uilleann pipes, which I made in 1983 of Mexican Rosewood and brass, are currently what is called a "half-set": which means they have a chanter (melody pipe) and drones (steady bass), but do not have what are called "regulators", closed keyed pipes that provide rythmic accompaniment...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top