frame

  1. rcflyer23

    Mirror Frame

    Got to do a little woodworking tonight. I built a frame for a mirror that we picked up a few weeks back. It's just about done just need to finish painting it and hang it up.. Here are a few pics. I used a pocket hole jig to join the frame together. The original frame and mirror View image...
  2. B

    Teak Frame finally finished

    Here is my first attempt at a picture frame that was not going to be painted. I was okay with how my joints turned out, but there is lots of room for improvement. I appreciate all the help and suggestions for miter sleds and jigs, which I will be building soon. I had one joint with a...
  3. Walnut Frame and Panel Crib Project

    Walnut Frame and Panel Crib Project

    Sketchup Rendering
    • davejones
    • Media item
    • and crib frame panel walnut
    • Comments: 0
    • Album: Crib Project
  4. S

    HUGE Industrial Rack Frame Storage System 20K lbs total - $250 (garner)

    Not Mine! But, bought some 230v 3 wire cable from, nice guy, open to offers! http://raleigh.craigslist.org/tls/1567902445.html HUGE Industrial Rack Frame Storage System 20K lbs total - $250 (garner) Date: 2010-01-24, 9:27AM EST Reply to: sale-qqzn5-1567902445@craigslist.org [Errors when...
  5. bobby g

    Raleigh area jig game - picture frame sled

    Here is my picture frame sled using the UHMW PE material from EYEKODE for the runners. This is a fixed 45 degree miter jig that will, hopefully, allow me to make perfect 90 degree corners. This was the first time that I used this material but it won't be the last time. I really like the results...
  6. Luckbox72

    Picture frame

    We had a couple of pictures that my wife hated the frames. We found some left over hardwood baseboard from an old job that her company had done. I cute down the baseboard, planed, and the used a few router bits to make a profile. And this is the result. View image in gallery View image in...
  7. scsmith42

    Feathered oak picture frame

    There are certain advantages to having your own sawmill and kiln; one of which is being able to experiment with different milling techniques in order to produce some unique material. Feathered oak is one such product. Under NHLA guidelines it's considered to be a "defect" in a board; however...
  8. williams130

    Using green sawn E red cedar for the frame of an outdoor cabinet

    I'm considering using green sawn eastern red cedar for the frame of an outdoor cabinet. I do not have a lot of experience woodworking and no experience with green lumber. Can I joint/plane this stuff? I'm not sure how "green" it is but I'll ask to get an idea the next time I talk to the seller...
    • williams130
    • Thread
    • cabinet cedar frame green outdoor red sawn
    • Replies: 4
    • Forum: Wood
  9. U

    need estimate to repair or replace antique frame

    Hi, I am looking for someone who can give me an estimate to repair or replace an antique decorative stained glass window frame. Please let me know if you are interested, I have photos and measurements I can email. Thanks! Christine
  10. CrealBilly

    Drawer web frame question

    Looking for advise on gluing a web frame to a cabinet side, All species are solid wood, same species, same log even. The picture shows a sliding dovetail but mine will be a standard old dado. Do I have this right? Thanks
  11. IMG_21633

    IMG_21633

    • cpowell
    • Media item
    • frame profile rounded
    • Comments: 0
    • Album: Walnut DR Table
  12. IMG_21622

    IMG_21622

    • cpowell
    • Media item
    • frame profile rounded
    • Comments: 0
    • Album: Walnut DR Table
  13. C

    Arched Walnut Dining Table...Completed...pics at end of thread

    I have finally finished the rough out of the arched dining table frame. LOML found a pic and I dropped it into Sketchup. Took me a while to find the thick walnut then took even longer to sort out curves, dimensions, radii, etc. Joinery is M&T, except top rail table cross supports are cross...
    • cpowell
    • Thread
    • arched base dining edge end frame glued rounded smoothed table tablebase tablecompletedpics tableoval tableupdated thread top walnut
    • Replies: 62
    • Forum: General Woodworking
  14. First Frame n Panel

    First Frame n Panel

    First Frame n Panel
    • Splint Eastwood
    • Media item
    • first frame n panel
    • Comments: 0
    • Album: Project Photos
  15. froglips

    Outdoor Swing Frame.....

    For those who might wonder, does he ever make anything? I was asked to build a frame for my parents newly aquired porch swing. The best part? The through holes for the bolts. They lined up. I just love a Shopsmith in horizontal boring mode! This was also my first time using...
  16. S

    picture frame moulding

    Hello, I recently moved to Durham. I'm looking for a good local or regional source for picture frame moulding. The only source I've found so far is Durham Bookcases. They have nice stuff, but at $4.50 per foot, it seems a bit expensive. It would be cheaper to buy a frame they had made...
  17. H

    oval picture frame

    The LOML was hanging some family photographs. My Grandmother photo was not behaving. " Come look at this and see if you can find the problem" Says LOML. The picture frame is a 22" X 16" oval with a convex glass. The photo was taken in the late 1800s. The two screws that attach the wire to the...
  18. F

    Grain/curl orientation on frame and panel

    I'm about to start gluing up some frames and panels that I've been working on for a new piece. The panels are veneered with curly bubinga, and the pieces are bookmatched. The curl runs about 25 degrees from horizontal, resulting in a "v-shape" due to the bookmatch. So, the question that I'm...
  19. S

    First Frame, Up

    My first Picture/Photo Frame done! Walnut, mitered, biscuit joinery, with table edge bit. 2 coats of BLO, 2 coats of Poly, 2 coats of paste wax. (Milled from 1in thick stock) Was an excercise in Router logistics. (Any resemblance to picture(temporary placeholder), merely coincedental!)...
  20. G

    Need some finishing help - mirror frame

    So, I kind of boxed myself into a corner. I am making another Chippendale style mirror frame and am trying to solve the problem I've had with previous frames. After the pieces are cut out, the shellac top coat doesn't quite fill the pores and any kind of rubbing out is complicated by the jagged...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top