lumber

  1. Joe Scharle

    Lumber Prices

    Here's an idea for a service the site could offer if someone had the time to devout. http://www.ncwoodworker.net/forums/showthread.php?t=35422
  2. W

    Lumber Storage

    I know this topic of how do I store my lumber has come up many times but,as a newbie, I don't recall reading posts about it. My question is how do y'all out there store/ stack your wood? Are any of the commercial racks any good and if so which ones? Or do you build your own racks and what do...
  3. Z

    Cherry and Oak Lumber Suppliers?

    Hi All, I'm going to build two "dining" tables that will be about 9' by 4' (one from oak and one from cherry). Does anyone know of lumber suppliers within and hour or so of Columbia? Thanks, Zach
  4. C

    New Member with a lumber question...thanks in advance!

    I am new to forum and am from Greenville, SC...not to far from NC border. I am looking for a source to find circular sawn rough sawn pine (or other wood) that is milled from the old style circular saw mill as opposed to the bandsaw technique. Anybody have any ideas, or know of a source. I...
  5. SubGuy

    What is a good price for lumber?

    I've found a new source of lumber and I think the prices are good. What do you think is a good price on Walnut, Cherry, WO and RO per bf?
    • SubGuy
    • Thread
    • good lumber price
    • Replies: 23
    • Forum: Wood
  6. E

    Where can I find rough locust lumber?

    Looking for 8/4, 5/4 and 4/4 rough locust. I am hoping to use over the winter to make several Adirondack chairs and a couple of garden benches. From what I read, it should last very well outdoors. Lumber sources close to Richmond VA would be preferred. I saw one posting on craigs list near...
  7. A

    Free Select Cherry Lumber (you pay $100 donation)

    For NCWWs: All rough finish. 9" to 10" W x 10' L (I can saw it to half length for transportation); 14 boards of 4/4 and 4 boards of 5/4 also: Poplar 5/4 x 6" to 11" W x 6' L; 20 boards You'll need to carry the stuff from the half basement at the back of my house to the street (about...
    • AviOren
    • Thread
    • $100 cherry donation free lumber pay select
    • Replies: 3
    • Forum: Wood
  8. BrianInChatham

    Need help with receiving lumber shipment Chapel Hill area

    This isn't really a PE request, but I'm hoping someone can help me. I have a shipment of lumber coming in that will need to be received at a location with a loading dock and the means to unload a large pallet, presumably a forklift. This was going to be delivered to my neighbor's granite shop...
  9. gordonmt

    merbrau lumber

    I need to find a source for Merbrau Lumber. This is an inported deck wood from Australia. Does anyone know where I might find this critter?
  10. WoodRose

    Have trees... need lumber!

    Due to a recent storm that damaged the tops of a few hardwood trees in my backyard I may be taking a couple of them down very soon, or more accurately hiring someone to take them down. The big tree and its twin are slightly in excess of 36 inches around sprouting from a good size crotch. So all...
  11. CrealBilly

    Mills Custom Sawing Final Kiln Dry Lumber Run

    Scott Smith, called me tonight to remind me I have a little over 500 Board Foot of 4/4 Quarter Sawn Red Oak out at his place. I sawed this Red Oak last winter form a few nice butt logs before I took my saw mill to my father in law in southern Illinois. I vaguely remember taking the lumber to...
    • CrealBilly
    • Thread
    • custom dry final kiln lumber mills run sawing
    • Replies: 21
    • Forum: Wood
  12. B

    CL: Walnut and Cherry Lumber - $2 (Harmony)

    Bought ~50 bf of 8/4 cherry from the poster of the ad, Doug Greer, on Friday. Real nice guy and great to work with. He was almost out of the cherry, but said more was on the way. He was getting ready to send 3,000 bf of walnut to be kiln-dried. Also had some HUGE beams of pine from an old...
  13. R

    Looking for Walnut and Cherry planed lumber

    I am only home on weekends, is so it has to be someone who is open Saturday or a Monday. Any help would be appreciated.
  14. H

    Must Sell Lumber & Possible delivery

    Would consider delivering 3hrs. away from Canton for $200.00 more if someone or a group wanted it all. Could deliver on Friday or Saturday. 4/4 S. Maple 10' 1C & Btr 290' - .65 bdft 6/4 S. Maple 8' 1C 57' - .65 bdft 4/4 Ash 12'-14' FAS 1346' - .85 bdft Some boards have stain on them. 1/2...
    • hroykelly
    • Thread
    • delivery lumber sell
    • Replies: 1
    • Forum: Wood
  15. H

    Price reduced again> Lumber must sell

    I would like to have it sold by next weekend so it is priced to sell. 4/4 S. Maple 10' 1C & Btr 290' - .65 bdft 6/4 S. Maple 8' 1C 57' - .65 bdft 4/4 Ash 12'-14' FAS 1346' - .85 bdft Some boards have stain on them. 1/2 board stained, rest clear. Wide widths. 4/4 R. Oak 9'-10' 1C 418' - .60...
    • hroykelly
    • Thread
    • again&gt lumber price reduced sell
    • Replies: 3
    • Forum: Wood
  16. bluthart

    Lumber Run - June 13th - more wood available

    Hello folks - time to clean out my lumber room again. I will be traveling to the Raleigh area on June 13th. At this point I plan on going as far as Burlington, exit 157 Buckhorn Rd. If I get more of a response from the Raleigh area I will consider going farther east. Here is some of what I have...
    • bluthart
    • Thread
    • 13th area greensboro june lumber run triangle wood
    • Replies: 21
    • Forum: Wood
  17. bluthart

    Lumber Run-More wood available

    It now looks like I may be driving towards the Raleigh area, probably around Burlington (maybe the truckstop on Buckhorn Rd (Exit 157) I will list more wood that I will have available and will have smaller quantities available. Please PM me with any wood that you may be interested in. I will...
    • bluthart
    • Thread
    • changed lumber run runmore sale wood
    • Replies: 21
    • Forum: Wood
  18. L

    Lumber: Greensboro CL

    Not mine, no price listed but sounds like he wants to sell fast. Mostly rough cut red oak, some other lumber included. I emailed about buying the plywood http://greensboro.craigslist.org/mat/1769283702.html
  19. M

    Turning Kyle's Lumber into Furniture

    Got a bunch of Red River Birch from Kyle a few weeks ago, and transformed it into this. Actually just the chairs, finished today. I made the table about 25 years ago! Wife just had to have patience 'till I got around to the chairs... Thanks, Kyle, the birch is awesome! Matt...
  20. S

    Lumber

    Hey guys. Anyone know a decent place I can get S4S lumber around the Charlotte are or fairly close? The prices at HD and Lowes is scary. I don't have a planer or jointer yet so I'm limited. Thanks for any help.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top