large

  1. gdoebs

    Very Large Oak to take down!

    A friend of mine at work just bought a house in Greensboro. There is a VERY large oak in the back yard that is hazardous to the house and she needs it taken down. I'm guessing it's about 5-6' in diameter at the base. I'll post some picts when she sends them to me. I know sometimes one can find a...
    • gdoebs
    • Thread
    • large oak
    • Replies: 6
    • Forum: Wood
  2. peteb301

    Needed for picnic - large ice chest

    If anyone in The Cary or Raleigh area has a large Ice chest - the kind fisherman would take to the coast - we would like to borrow it to keep our BBQ and other items cool for the picnic. No, the BBQ won't be served cold - it will be in large 13 X 22 inch pans and then heated on the grill...
  3. CarvedTones

    looking for styrofoam in large sheets (4x8)

    It's for my Y Guides raft for the 3rd year race. We are basically making a 16'x4' surf board, foam sandwiched between a couple of layers of OSB. OSB would be a poor choice, except we picked some up dirt cheap and it is only going to be in the water about 5 minutes at a time, one to three times...
  4. flyrod444

    Cored half of a large oak burl today

    I worked up half the large oak burl today. I only had a handfull of scrape from the half I cored. I ended up with 8 bowls including the bottom I cored off to use. It is some of the prettiest oak I've ever seen. I hope it dries without much problem. The bggest is around 17" in dia. Jack Blank...
  5. First Mahogany Cut

    First Mahogany Cut

    Table or Desk Top Clock
    • Don Sorensen
    • Media item
    • clock face large
    • Comments: 0
    • Album: Past Projects
  6. I

    Anyone know where I can get a large panel planed in the Greensboro area?

    At least 30" wide capacity is needed.
  7. ashley_phil

    (2) Large Auctions Closing next week

    The first is here in North Carolina at TI Industries and it's one we are doing. They are a large pre-finished moulding organization so most of what's offered is larger, older and not in the shape most of us would want. But there are some nuggets in there, especially storage racks and carts...
  8. CohibaCris

    Finding large stock...

    I'm a fairly experienced woodworker and carver with a conundrum - I want to break into carving large billets or logs (12" or larger diameter - 3 to 6' lengths) and I've got the proper equipment to get going - except the wood... (minor problem to be sure) So, can anyone help me out with: A...
    • CohibaCris
    • Thread
    • finding large stock
    • Replies: 13
    • Forum: Wood
  9. NZAPP1

    Looking for large turning blank

    I am looking for large turning blank at least 14 x14 x 8 to 10 thick. I have a request for a set of nesting bowls. Looks like I may need to buy a bowl saver if I can not find someone locally with one :swoon:. I am looking for maple or black walnut but anything in that size may be ok. It needs to...
  10. The WoodButcher

    Large Pen Blanks

    Heres a few pen blanks for all you big guys. I recon you could use a shovel for a gouge.:rotflm:
  11. The WoodButcher

    Removing Large Cants From The Mill

    :D Hi All, I have a customer that ordered 14 12"x12"x20' posts for a barn he's building. Here's a video of how we get these cants off the mill when complete. We have to do it this way because the roof doesnt allow for the mast of the forklift In the front of the mill building...
  12. Ncdawgs1882

    New & improved Freeware for printing large patterns

    So not too long ago Cathy posted a link to a freeware program that allowed you to print large posters on a home computer! Well I found a better program thats just as easy & allows you to set specific sizes for your patterns! That was one of the main concerns I had about the other program so here...
  13. flyrod444

    Large birch bowl

    Here is a birch burl bowl I turned this winter. It is the 2nd largest of 5, I cored out of the burl. It measeres around 15" in dia. by 7"+ high. It is turned thin for a bowl of it's size. It warped so bad drying that I had no choice but to make it thin to make it round again. It is very light in...
  14. cskipper

    Freeware for printing large patterns

    Here is a link to a freeware application for printing large patterns on regular sizse paper and piecing it together. That's great for those of us who don't have the PHP type programs. I tried it and it's slick. http://www.users.bigpond.net.au/postaganda/
  15. sawduster

    [How Do I-Gallery] Large volume of photos

    I took a lot of pics at Klingspor's today . What is the best way/place to post them for all to see ? ( after I go through them of course )
  16. G

    Getting a large glue up done

    I need some 4" x 8" x 75" thick oak boards jointed, glued up and then planed or sanded smooth for a bench top. Final width is 26". I am located in the Independence, VA, area and am looking for doing this near the end of June. Any ideas on where I can get this done? Why until June you might...
  17. mshel

    Large size threaded inserts

    I am looking for some large, ie 3/8" or larger threaded inserts. I am coming to Raleigh tomorrow and just wanted to know who might have such an animal so I don't burn a lot of gas chasing ghosts. I will be using the inserts and hanger bolts to repair a king size bed for a client who wants to...
  18. dino drosas

    Beginning of a Large Gloat

    No new major tools to report. With an expanded two car garage for a shop, I am maxxed out in the floor space department. I have pretty much everything that I need except space. With that in mind, I have been thinking about a storage area; especially for lumber. The best and most cost effective...
  19. Nice Figures

    Large Project Help Needed

    Hi All, Hope someone out there can help me out. We own Nice Figures Studio and Lumber Sales and have just moved to a new location at the beach. We've got a nice sign but I really need and eye catcher. I'm going to put a few large slabs out by the road but what I would really like is a very large...
  20. D

    Looking for large pieces of cedar for mantles

    I am looking for large pieces of cedar that i can make mantles out of say 8ft long 4-6 in thick and 10-12 in wide if its a little smaller thats fine but not too much smaller, larger is fine any suggestions? Thanks Guys! Or maybee something else that would make some nice mantles but i...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top