fence

  1. woodworker2000

    Raleigh Cl - Delta Contractor Saw w/Bies Fence and PC Router $400

    Looks like a good deal to me. Not mine. Linky: http://raleigh.craigslist.org/tls/1755094236.html Delta Industrial Table Saw w/router - $400 (NE Raleigh) Date: 2010-05-23, 9:13AM EDT Reply to: sale-kqmtk-1755094236@craigslist.org [Errors when replying to ads?] Delta Industrial Table...
  2. eyekode

    How much drift adjustment does a bandsaw fence need?

    I am drawing up a bandsaw fence and trying to figure out how much drift adjustment I really need. I have heard that drift can be adjusted out and I have been able to minimize mine. But I still want to build some drift adjustment into my fence. How many degrees do you think you need? I am...
  3. S

    Bis 30" Fence CL in Greensboro

    I'm not related, but this seemed like it was probably a good deal to me since on Amazon the closest comparison I could find was $369, but please point out if I'm wrong as I am no expert... New Biesemeyer Table Saw Fence - $250 (Greensboro) Date: 2010-04-25, 3:41PM EDT Reply to...
  4. N

    How accurate should a jointer fence be?

    The basic question is how much cupping and bowing in a jointer fence is an acceptable amount?:icon_scra Being basically a newbie I'm collecting what tools I can afford (and will fit in my one-car garage). Jet's 8" jointer/planer was too good to pass up. The price ($299.99) was right and it got...
  5. eyekode

    New router fence

    I finally got around to making a fence for my router table (thanks Steve it rocks!!!). It is sorta a hybrid of Norm's and Pat Warner's. View image in gallery The base is clamped to the table and the fence rides on the base via 2 UHMW PE runners. The fence only has 3" of travel but this is...
  6. SteveCogs

    CL: 52in Biesemeyer Fence and Rails - $200 (clt)

    Not mine. Might be a good upgrade for someone. http://charlotte.craigslist.org/tls/1682905718.html 52 in Fence and Rail package sitting in my shop and needs to go $400 new never used bought new saw with biese fence included. want 200 but can negotiate. Call704-578-6097
  7. R

    Table Saw Fence Alignment

    Every now and then, usually after finishing a big project, I like to "tweek" all my major power tools. I just finished said major project, a walnut pencil post bed, and spent yesterday checking and adjusting my drill press, jointer, radial arm saw and table saw. First, let me explain that I...
  8. W

    Peachtree Fence Clamps FS

    I have a set of universal fence clamps that I had for my Contractor saw Unifence.They will not work on the biesmeyer.They clamp onto a range of 1.5 to 2.5 inches.They are great for adding a aux fence. http://www.ptreeusa.com/tablesaw_products.htm#3317 Pm me if you can use them.$6 for the...
  9. CarvedTones

    setting a lousy fence with high accuracy

    Don't do this: Do this: That's my $6 HF caliper, but a more expensive one may work just as well :rolf:. Put the fence tight against the blade, measure over both (be sure you are over the teeth if the tips have overhang) and zero the caliper. Now move the fence slowly out to the size you...
  10. Bas

    Attach featherboard to table saw fence

    I have several of these featherboards from Rockler: The fence on my JET ProShop has a track for bolts (image from the review at Tom's newwoodworker.com web site) Any suggestions on how to make the 90 degree connection between the two? I have some ideas, but all of them fairly crude. Best...
  11. b4man

    Curious about table saw fence add on

    I don't know the correct term for the short piece of wood that can be attached to the fence to help prevent kick back when ripping but I wonder how many here use one? I used to use one but quit and I don't remember why because it makes sense to me. What is the determining factor on the...
  12. owen299

    Table saw fence opinions...

    I have an older Grizzly 1022 table saw that i would like to replace the fence on for something with a little less 'WOBBLE". Got the saw a couple yrs ago for a pretty good deal and wonder if it's worth upgrading the fence or raplace the saw (rather not). Anyone having any info would be a great...
  13. G_ville_worker

    Rigid 3650 Fence Alignment tips

    I've been fusing with getting this fence square. Do you guys have any tricks that have helped you? Do you loosen the screws lock it down and nudge it then tighten while locked down? Adjust it not locked down? How tight do you adjust the bolt at the end of the fence? It seems I can get it...
  14. reprosser

    Spar Varnish on cedar split rail fence

    I am installing ~ 1000 feet of fence, and the wife wants to varnish to keep the color longer. Would probably recoat each year or so - depending. I am NOT planning to brush coat that much fence, so I am looking at spray options. Maybe a Wagner airless painter would work? Anyone have any...
    • reprosser
    • Thread
    • cedar fence rail spar split varnish
    • Replies: 10
    • Forum: Finishing
  15. CrealBilly

    Black Locust - It aint just for fence posts anymore

    Here's another table I'm working on for the front porch, it's Quarter Sawn Black Locust HARD wood, it sure is pretty though... This wood about worked me silly, it burns real easy and had to progressive sanding fom 20 grit to 220 grit. I sanded every piece. It's silky smooth now and hard as a...
    • CrealBilly
    • Thread
    • anymore black fence locust posts
    • Replies: 36
    • Forum: Wood
  16. W

    Old Craftsman TS Fence

    Guys and Gals, I'm sure there are members who deal with or use older Craftsman Tools ,That is who I'm trying to reach.I have a Model 100 TS fence that is in great shape.I do not have any rails for it but if they can use the fence please get with me.I kept it after I sold my...
  17. decibel

    Right tilt Unisaw at woodwerks $699 (no fence)

    Saw this on another board looks. Right tilt uni brand new for $699 with no rails or $899 / $999 for 30" and 50" with rails. $100 shipping .... http://www.woodwerks.com/delta-36812r-right-tilt-unisaw-230v-rails-fence-p-5875.html
  18. T

    INCRA Table Saw Fence Review

    I posted my review of the INCRA Table Saw Fence System earlier today. I have been getting lots of email on this fence/JET ProShop Saw combination. It's done and up at the link below! http://www.newwoodworker.com/reviews/incratslsrvu.html
    • tom hintz
    • Thread
    • fence incra review table
    • Replies: 9
    • Forum: Reviews
  19. T

    Delta Fence System

    :gar-BiMy Brother lives about 25 miles north of Atlanta and asked me to post this here for him. I guess its not to far of a drive from western carolina. He said it weighs about 55 lbs so shippin to carolina would ne around $30 if any ones interested...
  20. T

    Kreg Bandsaw Fence $88

    Hartville tools has the Kreg Precision Bandsaw Fence on sale for $87.95 with $9.99 shipping. If:gar-Bi you order the microadjuster with it for $11.95 shipping is free. Won,t show up until in cart. Good deal considering everywhere else its about $140-150 without shipping

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top