drawers

  1. Mike Davis

    Refinishing chest of drawers

    I worked in screen printing for about 15 years and back then we didn't use gloves or respirators, so I got a major dose of chemical, had to quit that career and still have sensitivities to certain chemicals. I can't walk down the detergent isle in a grocery store without gasping for air. So...
  2. Cabinet

    Cabinet

    Example of an item a friend would like to acquire
    • nblong
    • Media item
    • drawers shallow surface tilted work
    • Comments: 0
    • Category: Furniture Projects
  3. BKind2Anmls

    The Saga of the Messed Up Drawers

    Does anyone at NCWW make dovetailed drawer boxes? I would rather buy them from a member than from somewhere else. Here is my sad tale.:gar-Cr A friend of mine is helping me build my new shop. In exchange, I was building the drawers and doors for his new kitchen cabinets. He built the cabinets...
  4. BKind2Anmls

    Need Lumber for Drawers

    I'm looking for about 100 board feet of drawer wood. Possibly soft maple, poplar or ash. It needs to be dry. If anyone has any, please let me know. Thanks,
  5. Dave jones Excursion Filled w/ Snap-On Drawers & Slides

    Dave jones Excursion Filled w/ Snap-On Drawers & Slides

    • MrAudio815
    • Media item
    • dave drawers jones snap-on visitor
    • Comments: 0
    • Album: Extras
  6. Dave Jones loading the Last Snap-On Drawer Slide.

    Dave Jones loading the Last Snap-On Drawer Slide.

    • MrAudio815
    • Media item
    • drawers snap-on visitor
    • Comments: 0
    • Album: Extras
  7. Dave Jone loading the Snap-On Drawers

    Dave Jone loading the Snap-On Drawers

    • MrAudio815
    • Media item
    • drawers snap-on visitor
    • Comments: 0
    • Album: Extras
  8. Walnut 10 Drawer Chest - Side View

    Walnut 10 Drawer Chest - Side View

    Side view, router jig made dovetails, notice closet rod holders in side. Stealth gloat on shop planes in background. 1st project in the new shop back in 2002
    • Ozzie-x
    • Media item
    • chest closet dovetails drawers of walnut
    • Comments: 0
    • Album: Furniture, Projects & Woodworking
  9. Walnut 10 Drawer Chest - Front View

    Walnut 10 Drawer Chest - Front View

    Front view of a built-in 10 drawer chest for our MBR closet. Walnut drawer faces and trim, poplar drawer boxes, walnut stained birch plywood sides.
    • Ozzie-x
    • Media item
    • chest closet dovetails drawers of walnut
    • Comments: 0
    • Album: Furniture, Projects & Woodworking
  10. Travis Porter

    House of drawers

    You may have seen the threads on the cabinet project I am working on. This thread is for the drawers. All 42 of them. Normally, I like to dovetail all my drawers. Historically, I have used my Leigh jig, but when you have a lot of drawers to do, it is SLOW as you have to do each part...
  11. B

    Chest of drawers finished...

    Well I finally finished the chest of drawers for my daughter that is due in less than two weeks. I made quite a few mistakes and learned a lot about wood working and myself in the process. It isn't on par with a lot of the work I have seen you guys do but I am quite proud of it, mistakes and...
  12. skysharks

    Finished the Chest of Drawers

    I promised a finished picture of the Chest of Drawers so here it is. Thanks for looking.
  13. dino drosas

    Finished top Unit for Chest of Drawers

    After I made the bow front chest of drawers, I decided to make a smaller drawer unit to sit on top of it. A set of junk drawers , if you will. I got the inspiration looking through a Thomas Moser catalog and I have to admit that I am quite happy with it. I had just gotten my Festool Domino when...
  14. Bryan S

    Finishing drawers

    I have read a few places not to finish drawers with an oil based finish mainly because of the off gasing and the smell stays in the drawer for along time. What has been your experiance here? I was thinking with the rate this project is going it will be 6 weeks (or longer)before I am finished...
  15. Shamrock

    18 drawers- 18 days

    Hey Folks- Before going out and buying the Leigh dovetail jig I thought I'd cut a few by hand to see what I'd be missing-The drawers are for the base cabinets of my new miter saw station: Photo 1: the cabinets :2 the poplar ready to go :3 the tools :4 the 1st drawer -really gappy :5 the 1st 4...
  16. LeftyTom

    The Joys of Drawers

    Ahhh, nothing likely carefully measuring the opening, followed by cutting the pieces (mitered corners) and double-checking the dimensions. Then glue up 3 sides, assuring the sides are 90 degrees to the face. Cut the luan for the bottoms, adding felt for a posh look. At last, I glue the backs...
  17. Jon

    making Drawers ?

    I have never done drawers and I would like to know where to start and what slides to use. They are for my shop. the opening is 24 deep by 27 wide. So what do you guys say I should do. Drawers will go in here. Here it is so far.
  18. Canuck

    Drawer(s) in an Apron? .....Writing Desk Done!!

    Well. Here I go again...... I have been looking at ways to incorporate a drawer into a table apron. While there seems to be several options out there on the internet, I was wondering if anyone here could recommend a good book that cover this type of construction. The only experience I have had...
  19. U

    Help Wanted: Custom Kitchen Cabinet Drawers

    Hello, My name is Jessica and I 'am looking for some one who can make a few kitchen drawers for us and to match the stain as close as possible to our exsisting kitchen cabinets. Help, please!! We bought the house thinking it would be simple to replace some drawers and we cant find...
  20. J

    Help Wanted: Custom Kitchen Cabinet Drawers

    Hello, My name is Jessica and I 'am looking for some one who can make a few kitchen drawers for us and to match the stain as close as possible to our exsisting kitchen cabinets. Help, please!! We bought the house thinking it would be simple to replace some drawers and we cant find...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top