Hey all Charlotte area NCWW's,
Details PM'd to all those who showed interest. PM directly with any further questions. Thanks all
Ok all, here's who we have so far (L = lunch -starts at 12:30 Sonny's BBQ on Tyvola Rd. D = demo at Shamrock's)
Pete M -- L + D
neslone -- L + D
tarhead -- L + D
matt furjanic -- L + D
nutball -- L + D
gregsmith -- L + D
woodman2k -- L + D
meredj -- L + D
umich684 -- L + D
timf67 -- L + D
Shamrock -- L + D
mquan01 -- L + D (maybe)
bwat -- L + D (definite maybe)
mckienziedrums -- L + D (maybe)
Randall Kepley -- D
warren46 -- D
Bkind2anmls -- D
amishwarlord -- D
I'm going to let this post run on till Wed the 7th and then I'll send everybody that's signed up the address
After my "Finishing the Finish" post there was some interest shown in having a get together demo in the Charlotte Area. I talked with Matt F., Pete M. and Tim and here's what we have come up with, Let's see if we have enough interest.
What: Charlotte area get together (possible lunch) + Finishing the Finish Demo w/
Matt Furjanic showing us some French Polishing techniques
Pete M showing us the micro-mesh approach
Tim showing us the Rotary Polisher method (if Tim can't make it I'll try and fill in and we'll see
how bad I can mess up a finish:gar-La)
Date : Sunday Sept. 11th
Time : 1:30 pm till ? (We will meet for Lunch at Sonny's BBQ on Tyvola RD at 12:30)
Where : My shop here in the center of Charlotte
Why : Cause it's about time!
So let's see what kind of interest we can drum up, if we have enough people it'll be a go!
Details PM'd to all those who showed interest. PM directly with any further questions. Thanks all
Ok all, here's who we have so far (L = lunch -starts at 12:30 Sonny's BBQ on Tyvola Rd. D = demo at Shamrock's)
Pete M -- L + D
neslone -- L + D
tarhead -- L + D
matt furjanic -- L + D
nutball -- L + D
gregsmith -- L + D
woodman2k -- L + D
meredj -- L + D
umich684 -- L + D
timf67 -- L + D
Shamrock -- L + D
mquan01 -- L + D (maybe)
bwat -- L + D (definite maybe)
mckienziedrums -- L + D (maybe)
Randall Kepley -- D
warren46 -- D
Bkind2anmls -- D
amishwarlord -- D
I'm going to let this post run on till Wed the 7th and then I'll send everybody that's signed up the address
After my "Finishing the Finish" post there was some interest shown in having a get together demo in the Charlotte Area. I talked with Matt F., Pete M. and Tim and here's what we have come up with, Let's see if we have enough interest.
What: Charlotte area get together (possible lunch) + Finishing the Finish Demo w/
Matt Furjanic showing us some French Polishing techniques
Pete M showing us the micro-mesh approach
Tim showing us the Rotary Polisher method (if Tim can't make it I'll try and fill in and we'll see
how bad I can mess up a finish:gar-La)
Date : Sunday Sept. 11th
Time : 1:30 pm till ? (We will meet for Lunch at Sonny's BBQ on Tyvola RD at 12:30)
Where : My shop here in the center of Charlotte
Why : Cause it's about time!
So let's see what kind of interest we can drum up, if we have enough people it'll be a go!