update

  1. After-2a

    After-2a

    • SevenPin
    • Media item
    • kitchen update
    • Comments: 0
    • Category: Member Galleries
  2. After-11

    After-11

    • SevenPin
    • Media item
    • kitchen update
    • Comments: 0
    • Category: Member Galleries
  3. SteveColes

    All done. Large sata disk drives for FREE

    I've upgraded a few of my disk drives on my home computer and NAS. I have some older ones to give away. There is: WD WDE6400 640GB. SATA 3.0 Gb/sec 7200 RPM -------Ben325e WD WD7500AACS 750GB SATA 3.0 Gb/sec 7200 RPM-----RayH Hitachi hde721010sla330 SATA 3.0Gb/sec 1TB 7200 RPM...
    • SteveColes
    • Thread
    • 640gb added disk drive drives free large left list sata update updated version version3
    • Replies: 14
    • Forum: User Announcements
  4. T

    Weight loss. (update 2)

    Well, I dived into a diet last week. I found a great iphone app "Lose it!" It also can sync up with the PC or you can use the PC only. I have been thinking about my weight a lot lately and tried once or twice to write done what I ate each day to track calories, but to hard to keep up with. The...
  5. erasmussen

    Wip large turning Update

    I aint been being slack mr. Walker (know where that come from), but things have been a bit slow. So I will go ahead and post a WIP its a large turning not huge but large. Got the base started. Cutting segments for one of the rings enough segments for 1 ring sanding the segments...
  6. scsmith42

    Shop update - this month

    Good, steady progresss was made on the shop in January. In addition to getting internet access extended to the shop, the large dust collection system is complete, allowing me to bring the 4-head Baker moulder and the Mattison straight line ripsaw online. I completed the electrical hook-up to...
  7. SRhody

    Update Location

    NCWW, Not sure where or how to update my location as shown in profile, don't see it as an option under profile links. I relocated to FL about 6 months ago and never thought to update my profile to reflect current City/County info. User name: SRhody City: Brandon, FL 33511 County...
  8. scsmith42

    Shop update and NCWW member visits

    It’s been a great week at the farm, complete with several NCWW member visits! On Monday and Tuesday we fired up the sawmill and generated a couple of days worth of 8” x 8” and 6” x 8” red oak beams for a local customer. The customer even treated me to lunch at Skippers in Apex! Also on...
  9. Trent Mason

    Water heater update

    OK folks, I am officially baffled. :confused_ The maintenance guys replaced our old water heater with a brand new one (same size, etc) and the hot water STILL runs out after two showers (10 to 15 minutes each, 20 to 30 minutes total). The tank is located in our laundry room, which is heated, so...
  10. ErnieM

    Benchtop router table - FREE to good home UPDATE

    Four members have expressed interest in this table - thanks to all who responded. I am closing this thread. Having just built a router table, I'm looking for a good home for my old benchtop table. It's a Sears Craftsman Professional about 7 years old. If someone in NCWW has no table and...
  11. merrill77

    Folding TS outfeed table - DONE!

    After finding that the outfeed table I bought for my SawStop PCS would not work with the mobile base, I opted to build my own. Due to the placement of the saw in my small shop, I need to move it pretty frequently. In addition, I often need to move around the back side of the saw - so being able...
  12. ErnieM

    Thinking ShopFox - UPDATE

    As you know, I'm having a problem getting ShopFox parts. Thought you might be interested in reading some of the correspondence I've had with the company. This is the third letter I wrote to ShopFox. Dear Sir, I must admit that I am sorry I purchased my machinery from ShopFox. It's not that...
  13. ScottM

    (Important LUNCH Update) Mid West Tool Collector Meeting (MWTCA)

    I will start this off. Who all are planning to attend the MWTCA meeting in Hillsborough on January 15th? If we have enough interest maybe we can get one of the the good Hillsborough folks (Jim or Bob) to organize a NCWW lunch at one of the local eateries. It does not get much better...
    • ScottM
    • Thread
    • collector important lunch meeting mid mwtca tool update west
    • Replies: 27
    • Forum: User Announcements
  14. scsmith42

    Lathe advice sought... UPDATE!

    I'm thinking about "going over to the dark side" and adding a small wood lathe to my shop repetoire. FWW recently did a head to head comparison of several small/mid size lathes, and the Penn State Turncrafter Commander (with bed extension) caught my eye. I like the power (1 hp), relatively small...
  15. Douglas Robinson

    Nonprofit update

    I spoke with our lawyres yesterday. In the response to the letter from the IRS, we will have to amend the by-laws and potentially the article of incorporation. Any such changes will have to be voted on by te corporate members. We will know better on monday. If we need to have sucha vote I...
  16. Douglas Robinson

    Pens for the Troops Update

    I just got the following update from CPO Tom Sanchez (I am taking his thanks to me to mean all of the people that contributed to the project): "Doug, Thanks so much for the pens that you and your network of woodworkers made for myself and the troops of my Command. They are being very well...
  17. Douglas Robinson

    Non-profit update

    FYI: We received a response from the IRS requesting more information. I am working with the attorneys in preparing our response. I will have to sign it. When that time comes I will contact Joe ahead of it to get a check for the filing fee of $850 already incurred. Doug
  18. 02blues

    update for my hand tool buds

    I posted this in woodcarving but thought I would throw it out here too. This is the forum where I live. White oak Peter Follansbee style bible box. Almost ready for the hinge. Will carve a quote on the inner lid and my name on the bottom before the finish and final attachments. Plan on my...
  19. SubGuy

    Update on my Storage Bench

    Got all the sanding and planing done. I will attatch the top when I'm done finishing. What do you think so far? View image in gallery View image in gallery View image in gallery View image in gallery This is my Stanley No 6 Plane and the top as I was working it. View...
  20. B

    workshop construction update

    Finally getting some progress!! Pics to prove it!

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top