slides

  1. Bugle

    Drawer Slides?

    Sometime last year, I remember seeing someone had a bunch of drawer slides for sale. Anyone remember who that was? If you're the one, do you have any left?
  2. K&V 20" drawer slides

    K&V 20" drawer slides

    K&V 20" drawer slides
    • MarkE
    • Media item
    • 20" drawer k&v slides
    • Comments: 0
    • Album: Misc
  3. L

    Drawer slides

    I want to mount a couple drawers under a long work table. I need drawer slides that mount under the top (no sides) and to the side of the drawers. I was thinking that cabinet floor mounted slides if turned up side down would work. Any suggestions?
  4. Y

    help with drawer slides

    I'm trying to mount some new center mount ball bearing drawer slides, on an old chest of drawer. Can not figure it View image in gallery out. The slides do not come apart, (not that I can see). The back detaches and a lose locking tab. They did not come with instructions. Any help would be...
  5. drawer slide

    drawer slide

    • yanmarman2007
    • Media item
    • drawer slides
    • Comments: 0
    • Category: Member Galleries
  6. drawer slide

    drawer slide

    • yanmarman2007
    • Media item
    • drawer slides
    • Comments: 0
    • Category: Member Galleries
  7. BKind2Anmls

    Full Extension Drawer Slides

    http://wwhardware.com/catalog.cfm?GroupID=Cabinet%20Drawer%20Slides&CatID=Drawer%20Slides%2C%20Full%20Extension%20Ball%20Bearing&SubCatID=Economy%20Full%20Extension Woodworker's Hardware has a great sale on full-extension drawer slides and the review are very good as well, even though these are...
  8. L

    24" Undermount drawer slides

    If this note is better posted in the WANTED section of the classifieds, please LMK. I'd like to buy 15 pair of Blumotion 24" undermount drawer slides (or something equivalent, apparently Rockler has their version albeit only 21" or smaller), and figured I'd post here for leads. I'm currently...
  9. Umich684

    HC Soft Close 21" Drawer Slides

    Has anyone ever used Hardware Concepts under-mount drawer slides? The cost is 25% less than a volume discounted Blumotion soft close... It looks a little 'budget' but with the right project would save a lot of material cost Slide & Latch Thanks for any info
  10. Truefire

    18" drawer slides, great price

    Hey guys i have over 50 pairs of 18" drawer slides, typical style with small wheels. I cannot advise any further in regards to brand name, weight capacity and such, sorry. They would make excellent drawer slides for work shop drawers and such. $1.50 set - that is two pairs, enough to...
  11. Bas

    Shop cabinets - plywood and mounting drawer slides

    I want to build some shop cabinets. Nothing too complicated - face frame, drawers, doors. But, I do want them to last a while, and since it's MY shop, I want them to look good too! I'm going to need quite a bit of plywood. I have not been terribly impressed with the hardwood plywood here at...
  12. CrealBilly

    Ball Bearing Drawers Slides Are Really Sucking

    I'm about ready to take a 3lb hammer to two pairs of BORG bought heavy duty ball bearing drawer slides. The cabinet is square, the drawers are square. With the drawers closed one end of the drawer sticks out about a 1/8" of an inch from the cabinet on the RIGHT hand side. The other drawer...
  13. merrill77

    Anyone try Woodtek drawer slides?

    I'm considering their 1" over-extension ball-bearing slides for a project: http://woodworker.com/18-otrav-bb-slide-zinc-mssu-129-914.asp Can't find any reviews...anyone used them? TIA! Chris
  14. Truefire

    100+ pairs of cabinet drawer slides (both left and right sides paired)

    Hey guys i have over 100 pairs of 18" cabinet drawer slides for both the left and right sides of the drawers. Each pair is stamped left or right and they contain a rider wheel containing wheel bearings to ease drawer sliding ins and outs. $1.00 pair so that's $2.00 per drawer set (left and...
  15. zapdafish

    accuride drawer slides

    http://greensboro.craigslist.org/mat/1313660443.html I will be picking up a few boxes tonight. If anyone else is interested, I can try and snag some for them as well. If anyone in the Raleigh area want's a few, I will be in the area this weekend and could meet em at the Northern Tools in Cary...
  16. BKind2Anmls

    Pen Tip Slides Into Barrel while Writing

    I'm hoping someone can tell me what I need to do. I made a few slimline pens for friends and they tell me that, as they are putting pressure on the tip while writing, the tip gradually slides back into the barrel. Any advice? Is it something I'm doing wrong? Thanks
  17. K

    drawer slides

    Next project is going to be bathroom vanities made similar to the old wash stands. I am going to have two doors like the old wash stands but I will make them a little wider so I can have drawers down one side. The drawers will not be very big so the slides will not need to carry very much...
  18. Steve W

    Need Beyond Full-Extension Slides

    I'm not sure where to post this, so it's going in the DIY forum. I have recently-installed factory kitchen cabinets. I decided that I'd get a fancier blind-corner unit, so I got one where a double shelf pulls out on full-extension side-mounted slides, then is supposed to pivot to the side on...
  19. John Reeves

    Please help with new drawer slides

    I am trying to install new slides in existing kitchen cabinets, face frame. The drawers are 19" (back of face to back of drawer). The cabinet is 23" from the front of the face to the existing blocks that are holding the existing slides. I purchased 19" slides so I am about 4" short on the...
  20. Shayne

    Drawer slides

    I am building some draws to hold CD/DVDs and I originally thought when I drew up the plans that the draws would be ok with just some wax on the draw bottom and no slide hardware. I have now constructed the draws and they are bigger in real life then in my drawing :) So now I'm considering...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top