slides

  1. J

    Drawer Slides Source

    Anyone have a good source for quality drawer slides? I may have asked this before, but am just getting around to actually picking up some. They are just for shop cabs, but I am pretty sure I can get a quality slide elsewhere for what the borg wants for the cheap ones.
  2. NCPete

    WDIF full extension undermount slides?

    for frameless cabinetry? also should be 'low profile' as I have about 1/2 inch to work in... currently using 3/4 extension slides that will not make the customer happy:BangHead: on one of the drawers, and full extension 100# side mount slides on two others, which don't quite work as planned...
  3. Jim Murphy

    KV drawer slides $1.50 on closeout at Lowes

    At least in the Wake County area, the KV european drawer slides are on closeout. I bought 7 pair of 20" slides today, they were a buck fifty per pair. The endcaps, if you can find them, are forty three cents. They are not accuride, but these 20" slides handle 100#, and I don't like to lift...
  4. C

    Drawer Slides??

    Well, I have some idea on my cabinets, now I am trying to look for the drawer slides. Any type/brand you would recommend? Under or Side Mount? My current thinking was Side Mount, Full Extension, Ball Bearing. I would love to hear some feedback on Undermount Slide.
  5. L

    Question on drawer slides

    I am making dovetail drawers that run on slides for a kitchen cabinet. I cut the dovetails and cut the dado about 1/4" from the bottom of the drawer for the bottom plywood to go into. When I apply my slide underneath the drawer the screw comes up about 1/4". My concern is the strength I will...
  6. installing_the_bulletproof_rails_100lb_capacity_

    installing_the_bulletproof_rails_100lb_capacity_

    The rails were installed underneath. The ball bearing rails are rated to hold 100lbs.
    • OriginalChong
    • Media item
    • rail slides
    • Comments: 0
    • Album: Wedding gift
  7. Canuck

    Keyboard Tray Slides

    A person at my daughters HS has asked if I could put together two keyboard trays for the secretaries at their office. I probably have enough 3/4" ply to put together two, but I am at a bit of a loss as to where I can find the necessary "under mount slides".:-? I saw these at the Lee Valley site...
  8. J

    Drawer Slides?

    Anyone know what the most cost effective route is to get drawer slides for shop cabinets? Any help would be greatly appreciated. I don't want to spend more on slides than the cabinet.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top