router

  1. triton

    triton

    • Bugle
    • Media item
    • router
    • Comments: 0
    • Category: Member Galleries
  2. allisnut

    Bosch Router Table

    Since I can't post a classified, I'll just point at the craigslist ad.... Bosch Router Table Thanks, Adam
  3. bluedawg76

    router mortising jig

    in preparation for a number of mortises I need to make, I took the plunge (pun intended) and built a mortising jig for the router. Til now, I've either done them blind on the router table which is a bit of pain to setup or just chopped them with a chisel/mallet. On a recent post on routers and...
  4. T

    Router jig for cutting bench dog holes?

    Afternoon all, I remember reading an article/watching a video where a guy used a jig of some sort with a router, to get "dead-on spacing/accuracy" for these but for the life of me, cannot seem to remember where or who did it? Anyone here have any experience with such a thing? I am planing to...
  5. G

    Another Recommendation on a Router

    Well folks, I am sorry. Many of you offered some solid advice on what router I should get when I asked a couple of weeks ago. As I conducted my research, and I like to look at everything before committing to purchase, your recommendation on the Triton 3.25 HP router was superb. I also missed...
  6. allisnut

    Building a router table....

    My goodies from Rockler finally arrived a few days ago, and I had time to get into the project some tonight. I got the recess routed for the plate, and was pleased with how snug I got it to fit. I have to cut out the hole for the router and install the anchor and leveling screws. Now for the...
  7. D

    Need custom router bit.

    Have a restoration project on a Brownstone in Brooklyn and I need to replace some molding. Does anyone know of someone who can tool routerbits to match a specific profile? Thanks
  8. Tarhead

    Der beste Frästisch aller Zeiten ?...(The Best Router Table of All Time?)

    The German equivalent of Wood magazine has a few new videos by Guido Henn (Google him...he has other videos which are awesome) on a Norm Clone Router Table with some interesting twists. Here is an overview (turn down the sound if you don't understand German)...
  9. T

    Recommendation for small handheld router

    Morning all, I am looking into purchasing one of these but have never used one. I know there are variable speed models as well as other options..... Would appreciate your suggestions/comments for a good, well priced model. It will be used for some trim/finish carpentry, cabinet work, detail/work...
  10. G

    Recommendation on Router table and Router

    Well the 30 year old craftsman routers I have failed. I had two and inherited two, and over the last couple of years all have failed. Kind of get use to the sparks the worn out brushes emit, but then other pieces start falling apart too. I am stationed overseas as a D.O.D. teacher and have...
  11. J

    router profiles for cabinet doors

    I have been searching the net for a chart that shows the profiles for cabinet doors.I need to print it to show a customer. Any sites ideas? Thanks Dwight
  12. Gary_C

    Flush cut jig for router

    I'm wondering if any of you guys have made a jig for steadying a router when using a flush cut bit. I'm a complete newbie at woodworking and saw an episode of Woodsmith that showed this jig and think it would work for my current problem. My first read wood project is a set of nesting end...
  13. T

    bought a broken milwaukee router off of ebay

    not sure if this is a gloat I am not much about gloating but being thrifty I am all about... I took a little risk and just bought this off of ebay http://www.ebay.com/itm/MILWAUKEE-5616-20-2-1-4-Max-HP-EVS-BodyGrip-Router-/260904584279?pt=LH_DefaultDomain_0&hash=item3cbf200457 I had 2 or 3...
  14. llucas

    Help with router H.P.

    Bought a router table with a PC router in a table some time back for a good price and have used it for T and G stuff without probs...Now I am thinking of using for raised panel doors. I am not sure of the H.P. and I know I will need to reduce the speed. It is marked as a PC Heavy Duty Motor...
  15. T

    Leigh D4 and what router / routers to use with it

    Leigh D4 and what router / routers to use with it I just picked up a Leigh D4 jig off of craigslist :XXcompute I am not sure it is a gloat and since I have not taken a photo of it I am sure it is not a gloat. if you have this what do you think is the best router to use with this ? I have one...
  16. A

    Triton 3 1/4 HP Router

    I saw, through one of you guys, that Woodcraft has the Triton 3.25 hp router on sale. I am interested in this router mostly for use as a router table router. The videos on the woodcraft website illustrate that the router can be raised and lower from above the table with the use of a crank...
  17. J

    $50 Router

    Sears has their 9 amp fixed base router on sale this week end for $49.99. No experience with this router on my part, just saw the ad.
  18. blazeman45

    New Router Table Fence (Updated Pics)

    Started the fence for my new router table I recently built. It has a sliding fence that will have replaceable inserts. I took photos as I progressed.... Would have finished but I ran out of glue for the laminate!!:BangHead: View image in gallery View image in gallery View image in...
  19. ScottM

    Super deal on a colt router

    Not mine...no connection These are real handy and at this price you can't beat the deal. I have bought several recon tools from CPO and NEVER had an issue. http://ebm.email.cpooutlets.com/c/tag/hBOwoICB8Gn8CB8edEcNQzQlVLP/doc.html?t_params=
  20. Bugle

    I need a new router

    Ok, I've put this off long enough. I really need a good plunge router. My old fixed-base one finally said so long. I don't need one very often, but when you need a router, you need a router. I am seeking recommendations. I don't want to spend $800+ for a Festool, but I don't want a $29.95...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top