jewelry

  1. Curly maple jewelry box

    Curly maple jewelry box

    • mlzettl
    • Media item
    • jewelry
    • Comments: 0
    • Category: Member Galleries
  2. Curly maple jewelry box-close up of inlay

    Curly maple jewelry box-close up of inlay

    • mlzettl
    • Media item
    • jewelry
    • Comments: 0
    • Category: Member Galleries
  3. willarda

    Jewelry Box workshop

    I have one opening in the upcoming "Jewelry Box with Handcut Dovetails" workshop. This is a 2-day workshop to make a lidded jewelry box with half blind dovetails and a half-mortise lock and key. The project will be out of quilted maple and Peruvian walnut. The workshops are $160/2 days...
  4. S

    Splint's First Jewelry Box (or attempt at one)

    As a relatively new woodworker, here is my first attempt at making a Jewelry box. Featuring: Golden Oak stained Oak case Zebrawood drawer fronts and dovetail joints Walnut turned knobs, case back and drawer dividers Tan velour lined drawers All finished with 3 coats of tongue oil. Very...
  5. FredP

    jewelry box

    this is the latest project. cherry with maple top and drawer. rattlecan lacker!:gar-La; new pics further down.:rotflm: the pics are lousy but its all I can do. gone! :cool: fred
  6. LeftyTom

    Jewelry Armoire, Updated Pics

    Here is the latest step in my progress. I was all ready to mount the door Sunday, but I did not like th hinges I had selected. So, off to Rockler to order some other hinges and a few other things (last day free shipping). Monday evening came around, and I had marked the wall to mount my...
  7. TracyP

    Small Jewelry Box Ideas?

    I am getting ready to try to build a small jewelry box for the LOML out of cedar. Do any of you have photos or plans for a project such as this? I think it should be about 12" wide, and four inches deep and four inches from front to back. I would like to try to put a couple of dividers in it...
  8. adowden

    Jewelry box w/pic

    My neighbor provided me with a plan and asked me to build a jewelry box for his daughter's college graduation present. He specifically wanted me to use red oak from a tree that had grown in our neighborhood. That was not a problem since we had a red oak tree attack our garden about three years...
  9. LeftyTom

    Progress Report: Jewelry Armoire

    I am trying to post a few pics of my progress. My wife finally figured out what it is...:icon_scra. An online thanks to WalnutJerry, who put the tasty cedar in my mitts. I have yet to build the 6 drawers for the armoire, or make the ring rolls for one of the drawers. I have the mirror for...
  10. LeftyTom

    Wall Mounted Jewelry Armoire??

    LOML wants one for our 15 anniversary (April '08). I've seen a few online, but not quite what she has in mind. She wants one with enough height for necklaces (on 18" chains) do not touch the bottom of the compartment, enough ring rolls for a dozen rings, and two or three drawers for earrings...
  11. T

    Need source for jewelry box trays/inserts

    I need to find a source for plastic (or wood/fiberboard), flocked jewelry box trays/inserts. They don't have to be real fancy, just flocked or covered so I can skip that part of it. I used to get them at Woodcraft but they don't have them at our local store and I can't find them on their site...
  12. W

    Where to Buy Jewelry Box Hinges

    I am building a few boxes for friends. I went Rockler for the hardware. But, they are so expensive. I hope friends here have info on where to buy the solid brass hinges for a reasonalbe price. Thanks in advance. Qui
  13. DaveO

    Jewelry box....finished

    This is what I worked on over the long 4th of July weekend. I finished the finish yesterday night. It's Cherry with a Ambrosia Maple top panel. Felt bottomed drawers, and brass 5 mm barrel hinges. I finished it with blond shellac and then several coats of gloss spray lacquer with a final coat of...
  14. DaveO

    Cherry jewelry box...WIP-Updated pics

    Well here's todays fruit of my labor. I still have to key the miters, free the top, finish the trays for the insides and then sand everything down, plus appling a finish. But I am happy with the results so far, and also realize why the guy whom I am coping the design from wants around $500 for a...
  15. DaveO

    Jewelry box sides thickness ????

    OK, I would like opinions and advice. I am planning to work on a jewelry box over the long weekend. In my penny-wise , pound foolish normal mode of operations, I am not using a plan, just a picture. This is the box style that I am shooting for. The thickness of the sides...3/4", 5/8" or...
  16. C

    Jewelry Box Finished Pics!!

    I have completed the jewelry box. The box is padauk with lacewood drawer fronts and rear panel, wenge legs and pulls. A bunch of coats of Deft aerosol gloss lacquer. I will make dividers for a few more drawers but LOML has demanded I move it to its home! :lol: :lol: My photography skills...
  17. C

    LOML Jewelry Box WIP Pics

    Padauk box, lacewood drawers/back panel, wenge feet. I have assembled and fit the drawers to the box. The feet have since been assembled and attached and lacquered up all. Currently waiting on flocking to dry. Expect to deliver to LOML tomorrow night. The figure is more pronounced after...
  18. C

    Jewelry Box Drawer Joinery

    I'm making a box for LOML. 5 Drawers, 5/16 or 3/8 stock (probably poplar sides) with lacewood faces. I know DaveO asked similar questions while planning the box for LOHL and I looked at his finished pics but could not tell what joinery was used. I was considering a dado on the rear and maybe...
  19. Oak Jewelry box - Open

    Oak Jewelry box - Open

    • Henry W
    • Media item
    • - box drop jewelry tear
    • Comments: 0
    • Category: Member Galleries
  20. Oak Jewelry box - Closed

    Oak Jewelry box - Closed

    • Henry W
    • Media item
    • - box drop jewelry tear
    • Comments: 0
    • Category: Member Galleries

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top