gauge

  1. S

    grex 23 gauge pinners 15% off at the Fastener Company

    .
  2. TV

    Incra MITER1000SE Miter Gauge

    Found this on sale. Looks like a good deal. http://www.amazon.com/exec/obidos/ASIN/B0007UQ2EQ/bretsreviews3-20 tv
  3. Canuck

    Gauge Block from Scrap....

    Taking a queue from Tom Hintz and his website, I decided to try my hand at putting together a Gauge/stop block for my tablesaw... http://www.newwoodworker.com/buldgagblk.html Looking around the "shop", I managed to find several 12"x12" 3/4" plywood cutoffs sitting in a corner, a 1/4-20 T-nut...
  4. davejones

    Improved Factory Miter Gauge

    I was really beginning to notice the shortcomings of the miter gauge that came with my TS. There was upwards of 1/16th of an inch of play between the guide (basically a flat washer) and the slot. The bar itself wasn't this loose, but it moved maybe 1/32nd or so. That error of course is...
  5. Tar Heel

    Wixey digital fence readout gauge

    I know several of us recently bought this gauge when Woodcraft had them on sale. I have installed mine but cannot get it calibrated correctly. The typical Chinese manual leaves much to be desired and doesn't mention how to calibrate it. I move the fence to the point that it is touching the blade...
  6. Douglas Robinson

    Ral CL: Incra panel gauge and Incra 2000 miter gauge - $230 (Youngsville, NC)

    Incra panel gauge and Incra 2000 miter gauge - $230 (Youngsville, NC) Incra panel gauge and Incra 2000 miter gauge Please email or call (919) 562-6094 for further information. http://www.woodcraft.com/family.aspx?familyid=5395 http://www.woodpeck.com/incramiter2k.html...
  7. Nativespec

    Lee Valley Digital Angle Gauge

    Better hurry. Last time I was going to buy it they sold out. David http://www.leevalley.com/wood/page.aspx?c=&cat=1,51,58801&p=58801
  8. welldigger

    Miter Gauge recomendation

    I need an accurate miter gauge at a reasonable price. Any recommendations?
  9. cpw

    HF Digital Angle Gauge. Anyone used one?

    Has anyone used this Angle Gauge from Harbor Freight? Is it accurate? Can it be zeroed out against any surface like a Wixey? Or should I just wait for the Wixey to go on sale again?
  10. Jon

    Wixey TS Gauge on A Jet xacta fence

    Going to install one on my Jet and wonder if anyone has it on there Jet?
  11. M

    Poor Man's Angle Gauge

    For those of you that can't afford a Wixey Angle Gauge, there is always this one from Harbor Freight, now on sale!
  12. A

    New Readout for Wixey Planer gauge

    I've known for quite awhile and can now finally post- Wixey has a new planer readout (model WR510) with slanted display which is much easier to read, auto-off, and improved mounting hardware. I don't know whether you can get them from retailers yet because they may still selling out their stock...
  13. DavidF

    Wixey TS gauge on Dewalt

    I am about to fit my Wixey Table saw gauge to me Dewalt 746 Hybrid with the 52" rails and extension table. Has anyone done this to this saw, anything to look out for? TIA
  14. Badabing

    Wixey Digital Fence AND Angle Gauge at WC

    If anyone has been considering either one of these digital gauges from Wixey, now is the time to buy! WoodCraft has a special where you get both for $99, and I believe they still have the free shipping deal going on. The digital fence gauge would be a nice addition to any table saw and the...
  15. rick7938

    Miter Gauge Upgrade

    I am looking to upgrade the miter gauge on my Delta Contrator Saw. Various catalogs show new miter gauges from $50 for the basics to nearly $300 with many bells and whistles. My budget will only allow about $150 which will cover some of the mid-range Incra and Kreg miter gauges. What would you...
  16. A

    New Wixey Gauge on the streets

    The new Wixey digital height gauge for table saws, routers/router tables, etc. is out.
  17. Miter Gauge T-Track

    Miter Gauge T-Track

    Additional 5/8'' support blocks required under miter T-track.
    • KC7CN
    • Media item
    • 64a fold-up gauge miter outfeed powermatic t-track table tablesaw
    • Comments: 0
    • Album: PowerMatic 64A Outfeed Table
  18. gator

    Why Did I Ask For A Wixey Angle Gauge For Fathers Day?

    I did ask and I did receive. I went to the shop and checked all my set-ups, table saw blade angles, jointer fence, tablesaw fence, CMS set-ups, bandsaw setups, and more. Every one that I had set up using my conventional squares and measuring devices were dead-on - NOT! Thats why I asked for...
  19. mshel

    Updated pics of the slicing gauge

    Here are a couple of pics showing the custom made set screw that I had Rarebear (woodnet) make for me. Mike
  20. mshel

    Shop built slicing gauge

    I have wanted to make one of these for quite some time and currently I am working on a mahogany top which has maple crossbanding so I definitely had a need for such a tool. Got my latest edition of FWW and lo and behold, there was an article in it about such a gauge. I made this out of some BE...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top