gauge

  1. R

    veritas dual marking gauge

    http://www.leevalley.com/US/wood/page.aspx?p=67466&cat=51&ap=1 WOW! Nice looking, I'd like to hear from anyone that has acquired one and used it. (I'd show the pic, but I'm not that good.) Robert
  2. KenOfCary

    Looking for Stanley Brace Depth Gauge

    I'm looking for a #47 Stanley Brace Depth Gauge. Anyone seen one advertised anywhere? Thanks, - Ken
  3. sbarnhardt

    Miter Gauge for Old 10 inch Craftsmen Band Saw???

    I recently bought an old Craftsmen 10 inch bench top bandsaw. I realize it's not much of a bandsaw, but I needed/wanted something to cut plywood pieces closer to size for my scrollsawing. This one fit the bill and the price was right. Bought it and a Craftsmen 4x36 belt/disc sander for $25 each...
  4. A

    New Angle Gauge

    This is a follow-up to my post about using a tilt gauge with your TS to give you a precise, easy to read readout of blade tilt. The little Wixey angle gauge I used worked well, but I just got a better one: It's the NEW Wixey and a little larger than the old one: This one is chock...
  5. home made Digital height gauge

    home made Digital height gauge

    A modified $10.00 HF digital caliaper made in to a height gauge
    • minddust
    • Media item
    • gauge height
    • Comments: 0
    • Category: Tools & Equipment Photos
  6. marking gauge

    marking gauge

    Marking gauge
    • CatButler
    • Media item
    • gauge marking
    • Comments: 0
    • Category: Member Galleries
  7. BKind2Anmls

    Digital Remote Readout 35" + FREE Digital Angle Gauge

    Upgrade your table saw to an easy to read digital display! Get inch (decimal or fractional) and millimeter (metric) readings from 0" to 35". Features magnetic back remote readout unit with 52" cord that you can mount or move almost anywhere. Easy to assemble, easy to use! Mounting hardware...
  8. kooshball

    12 gauge in-wall 20a wire vs. 12 gauge extension cord on 20a circuit?

    Is there going to be a difference in performance of a tool drawing 15amps (dust collector) if I plug a good quality 12ga extension cord into a 20a outlet vs. running another outlet closer to where I want the tool? Obviously there is a safety risk with a cord laying on the floor but this is...
  9. CarvedTones

    Using a caliper as a height gauge

    This has come up a few times and I explained what I use but I am not sure it was clear so I figured I would snap a picture and explain... A couple of notes about the photo - The cracks on my caliper display are not from clamping it; it got smacked pretty good once and I was pleasantly...
  10. Bear

    Spindle gauge

    Hello All, I am looking for information, again. Sometime back, I saw a video clip of a spring loaded direct reading spindle gauge that looked to be quite handy. Unfortunately, I have lost the link to it and have forgotten the name. I think an individual or perhaps a small company builds it...
  11. red

    Rikon 14" bandsaw blade tension gauge help

    Hey All, Can someone post a pic of or tell me how their blade tension gauge is attached? Mine was bent when it was delivered (new) so I straightened it out and attached the round end over the pin sticking out from the bottom of the big spring. Is that how it looks on yours? My gauge is nowhere...
  12. Mr. Lahey

    How to Make a Marking Gauge

    Thought I would share this plan, I think I will give it a try. I want a marking gauge and would rather make it myself. Feel free to share alternative plans if you have them. http://www.popularwoodworking.com/upload/contents/290/0612_Marking_Gauge.pdf
  13. GarageWoodworks

    Squaring Your Miter Gauge

    Hey gang, I made a short video that describes how I align my miter gauge to 90 degrees using a dial indicator and a good quality square. Let me know what you think. Click Me Regards. Brian
  14. S

    HF 12" Digital Height Gauge -$13

    Need to print out page for local HF to honor Inet pricing! http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=93488 12" Digital Height Gauge Easy-to-read LCD display SAE and Metric readings Stainless steel magnetic column Carbide tipped scribe Sturdy cast iron base...
  15. Rob

    Bowl depth gauge

    Does anyone have any pictures of one's they've made? Thanks.
    • Rob
    • Thread
    • bowl depth gauge
    • Replies: 5
    • Forum: Woodturning
  16. G

    New, ultra modern, high tech, state of the art, depth gauge

    I decided to try and make a depth gauge for when I make boxes. Below is a picture of what I came up with. Simple, but it seems to do the trick. It also works for small, repeat small, bowls.
    • gsdoby
    • Thread
    • art depth gauge high modern state tech ultra
    • Replies: 8
    • Forum: Woodturning
  17. depth gauge

    depth gauge

    depth gauge
    • gsdoby
    • Media item
    • depth gauge
    • Comments: 0
    • Category: Member Galleries
  18. Mt. Gomer

    Miter Gauge Problem

    Ok, well it's not really a "problem" per se, at least not one I mind having. I have two very good miter gauges, an Incra Miter 1000SE and an Accu-Miter with clamp. Both have been heavily used but are in excellent condition with all the parts fully functional. I'm trying to decide if there's a...
  19. Osborne Excalibur EB-3 Miter Gauge

    Osborne Excalibur EB-3 Miter Gauge

    I just picked up this Osborne Excalibur EB-3 miter gauge. I have wanted one for years and finally purchased it.
    • red
    • Media item
    • eb-3 excalibur gauge miter osborne
    • Comments: 0
    • Category: Member Galleries
  20. red

    Osborne Excalibur Miter Gauge EB-3

    I just assembled my Osborne Excalibur Miter Gauge EB-3 that was delivered today. Does anyone here use one? Did you attach the rough grit sandpaper (used for slippage) to the miter gauge? I have not yet and I don't think I'm going to. But I'm willing to listen to others advice. I have...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top