front

  1. Flower basket drawer front

    Flower basket drawer front

    The wood is oak, pattern by Arpop
    • cskipper
    • Media item
    • basket drawer flower front
    • Comments: 0
    • Album: Detailed scroll work
  2. Finished Drawer Front

    Finished Drawer Front

    The main body is Soft Maple, the trim and knob are Walnut.
    • Michael Mathews
    • Media item
    • - drawer finished front
    • Comments: 0
    • Album: Michael Mathews
  3. Finished Drawer Front

    Finished Drawer Front

    The main body is Soft Maple, the trim and knob are Walnut.
    • Michael Mathews
    • Media item
    • - drawer finished front
    • Comments: 0
    • Album: Michael Mathews
  4. Mitered dovetails in Tiger Maple

    Mitered dovetails in Tiger Maple

    • Mike Davis
    • Media item
    • box drawer front ncww shadow
    • Comments: 0
    • Album: Case Work
  5. hymie123

    Cherry slant front desk

    I am nearly finished with my Daughters desk. I have a couple more coats of Waterlox on the front & knobs then I can complete the final assembly. The project took nearly a year due to other priorities last year but I am happy with the finished product. This forum has been a huge help selecting a...
  6. Bas

    Drawer front design dilemma

    I'm building some false drawer fronts for my shop cabinets. I want to make them look like the flat panel doors I made for the upper cabinets. View image in gallery Basic rails & styles, with a quarter inch plywood panel. Here's the dilemma. For doors, the rails are always in between the...
  7. sash plane

    Front vice, Right hand vs. Left hend...

    Why it the front Vice always on left hand side.... I'm right handed , but to me..?? It would feel better if the vice was on the right had side, for say cutting dove tails... or anything else...for that matter... I'm in the process of adding a front vice to my bench and have not placed it...
  8. S

    Finishing exterior solid wood front door

    I'm looking for suggestions-- I just finished and installed a new (raw) door for a friend. Used oil primer followed by Valspar Ultra Premium Interior/Exterior High Gloss black latex. I knew from the doors on my own house, that I could expect some problems at the weatherstripping-- paint...
    • sushinutnc
    • Thread
    • door exterior finishing front solid wood
    • Replies: 2
    • Forum: Finishing
  9. Mark Gottesman

    Need Advice on Front door Refurb

    I have a front door unit with side panels that needs a total refurb. The exterior finish has failed after neglecting it for way to long. It is, I believe, fir. I am leaning towards paint as the finish since I think it would be difficult to erase the dark color of the original finish. My main...
  10. LeftyTom

    T-Track on Workbench End & Front?

    Going through some old WW'ing mags, I came across a tip to use T-track mounted in the end edge of a workbench top , to provide a movable plane stop. The tip also mentioned using T-track mounted in the front edge of a workbench top to hold a board vertical. Simple enough. But are the T-track...
  11. PChristy

    Fake drawer front

    If this is not the right forum for this I am sorry:embaresse I am thinking about putting one of those fold down drawers where the fake drawer front is in our vanity - does anyone else have these and if so are they worth putting in? Thanks for the info:icon_thum
  12. Shamrock

    The after class shaping part 2 1/2 -the front legs

    Worked on the front legs of the rocker today, and I must say this has been the hardest process yet. The starting point was on the right and off the grinder form is on the left: Once off the grinder had to use a #8 carving chisel to "bring out the round half" of the leg-the part that's not in...
  13. gator

    Front, Rear, Side?

    Ok, so on a table saw the front is the side with the switch and you feed the wood from front to back. On a Router table the front of the table is the side with the drawers, etc and you feed the stock from right to left (generally, except when climb cutting). On a planer the front is the infeed...
  14. Steve D

    Drawer front progress

    This weekend I milled up a bunch of stock for the drawer fronts. I still need to spray them with anyline dye, glue up and spray with lacquer. This is a shot of my screw up, seem to have one of those on every project :oops: :oops: This is the jig I made for cutting the ends of the rails
  15. M

    Moving to curved front work

    I am what I'd call an intermediate level (assuming there is a way to measure) woodworker. I've made a pencil post bed, my dining room set and a number of boxes and such. I'd like to try my hand at curved front furniture but what has always daunted me is cutting dovetails and M & T's on curved...
  16. L

    measurements of door front stile and rails to cabinet

    Would like an opinion on measurements for stiles and rails when making paneled kitchen cabinets. My ff on the cabinet will be 2". Would you ever see them FF more than 2" or the door panels more than 2"? Lorraine

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top