end

  1. gordonmt

    How to mortise the end of a board?

    I have a project that requires several mortises (the hole) to be made in on the grain end of several small 2 1/2 inch wide boards. I have a table top mortiser but it does not lend itself to this type of board end drilling. I am leaning toward a drill, a vise, and some sharp chisels but I was...
  2. steviegwood

    End to End Wood Joining

    Hi Y'all, I have a question for all of you experts. I have an abundance of 5/8" wood with the longest pieces being 32" and the rest and most averaging 18". Can some of you give me some advice on good ways to end join this wood to make some longer more usable lumber? These woods are red oak...
  3. Bas

    Stackable end tables

    I'm thinking about making a few end tables. But rather than doing the traditional small - smaller - smallest approach where one fits under the other, I want to make stackable tables, like this: Does anyone have plans for something similar? I suppose this is your garden variety end table, but...
  4. PeteM

    Walnut End Table

    Here's my first post retirement project. This is copied from an old table that LOML wanted me to refinish. I started on it and it was such a piece of #%&#! that I decided it would be better to just make a "reproduction" (with a few minor changes). pete
  5. Canuck

    Glue or Let Them Float? (Update) End Table Done

    Hi, I think that I need a little word of wisdom from ya. I am the process of cobbling together a "Mission style" end table for one of my daughters. I have a "slatted shelf captured between the side stretchers on the lower part of the legs. The slats are 2" x 15" x 5/8" and the stretchers are...
  6. D

    Stump End Table

    Here's some pics of one of the end tables and a potential coffee table I'm working with currently. These have been rough sanded at 150 grit and are drying before final finish work. A generous wiping of lemon oil has been applied to highlight the grain and to help with drying and shrinkage...
  7. woodguy1975

    End of a Era and a new Beginning

    Well guys and gals I have some news.... As most of you know I had my shop/house up on the market. I put it up about 3 weeks ago and already have it under contract. I'm going to have to move out very quickly (before the EOY), but it is good to sell a house in todays market. It is a good sale...
  8. Matt Schnurbusch

    Das Booth... The END

    For the first 2 posts please see... http://www.ncwoodworker.net/forums/f29/das-booth-ongoing-saga-17889/ Well, it’s been a while since I last posted any progress on Das Booth, so here we go… To quote Jim Morrison… “This is the End.” The next part that I decided to tackle was getting the...
  9. C

    Workbench WIP...the end is very near!!!

    I started this thread a little while ago....http://www.ncwoodworker.net/forums/f81/workbench-wip-9872/ OK, it was a pretty good while ago. I finished the workbench base/top in 8 weeks or so...it has taken another year to finish (well, almost) the cabs/drawers. Would it be possible to get the...
  10. Glennbear

    End grain joints ?

    I recently acquired some nice kiln dried S4S oak of varying widths but most of it is less than 24" long. I could use some of this in upcoming projects but ideally I would like to make some longer lengths. I know that molding manufacturers amongst others use finger joints but is there another way...
  11. End Table and Coffee Table by stoneskippers

    End Table and Coffee Table by stoneskippers

    QS Sycamore and Walnut
    • cskipper
    • Media item
    • coffee end furniture stoneskippers table
    • Comments: 0
    • Category: Disqualified Entries
  12. Kalai

    How to deal with torn end grain

    Hi everyone, this is in response to a question from DaveO about torn end grain in bowls.:icon_scra The best way to take care of torn end grain is tools and technique, and of course certain woods carve better than others and will give you more, or less torn end grain. :eusa_dancA good example of...
  13. NZAPP1

    A week end adjustment. Like a new tool

    I added a home made riser block to my band saw this week end and now have 13 inch re saw capability:eusa_danc and it cuts great:icon_thum
  14. TracyP

    End Tables: Finally Done!!

    I spent some of the weekend working on the end tables I Have been planning for months. I got a lot done this weekend. I have the cases built and the tops cut to size. The only things that I have left to do is build the bases and drawers and attach the tops. Then of course comes the door...
  15. NZAPP1

    Week end progress and gold gloat

    This week end I completed 2 36 X 48 inch cabinets and 3 of the 4 doors :BangHead: it would have been 4 but I am 1 - 2-3/4 X 49 X 4/4 piece of maple :wconfused: and hung my air cleaner and finished attaching my draw fronts And NOW for the GLOAT I always thought the first GOLD in my...
  16. TracyP

    End Table Questions

    This is the end tables that I am building a pair of out of ash. I have a couple of questions for the pros. The LOML would like a door in the open area, that should not be a problem to do with the exception of the piece of edging that goes between the drawer and the open area. My question is...
  17. K

    Want to locate my miter saw at end of work benc

    I am tired of fighting with long boards and the short support on my compound miter saw (Dewalt). I have room at the end of my workbench to extend it and make a place for my miter saw. The workbench is flush against a wall with cabinets under it. I don't use it as a typical workbench but it would...
  18. TracyP

    End Table Help

    I was wondering if anyone had plans for end tables. I am looking for something with a drawer and closed storage under the drawer. Preferably a door covering the closed storage area. LOML cannot figure out what she would like as far as style. She is getting very close to realizing the...
  19. J

    InternetLumber.com month end special

    Just got an email from www.internetlumber.com Looks like they are having a month end flooring special for orders of $10,000 or more. Here's the on-line version: http://app.e2ma.net/app/view:CampaignPublic/id:5981.932391109/rid:e39bf1d45956ff1b792c5cbad183f3ce Thanks
    • jeff...
    • Thread
    • end internetlumbercom month special
    • Replies: 1
    • Forum: Wood
  20. Eaglesc

    The END

    This blank is ready to be drilled. THe diameter is about .73"+- Trying out a lens on my camera,(used Kodak)

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top