clock

  1. Contemporary Clock View B

    Contemporary Clock View B

    Purpleheart and Curly Maple
  2. Grandmother clock

    Grandmother clock

    One of my deceased friends and I built this,Runs great
  3. nelsone

    Clock Project

    I saw a set of plans on the net for making a clock. I know that doesn't sound like much, except the entire clockworks are made of wood! Have any of you ever done a project like that? If so I'd love to hear of any tips and tricks associated with the project. I think I'm going to tackle the...
  4. Arcrist

    Clock

    Is this as easy as it looks? Some routing for the top and bottom with a 1/4" box? Does there need to be something funny in the back to operate the clock? www.dreadcraft.com/clock.JPG
  5. Clock2

    Clock2

    A clock in progress (actually on hold) plus a couple of little puzzles
  6. ChrisMathes

    New Mantle Clock - my biggest project yet :-)

    For my wife's birthday, I made this mantle clock off of plans from Klockit. As many of you have helped me with questions/ideas over the past few weeks, thank you! I am very happy with this, considering I have only built 1 music box and some picture frames so far. This was a good challenge for me...
  7. Dad's Clock

    Dad's Clock

    Clocks made by my Dad.
  8. Dad's Clock

    Dad's Clock

    Clocks made by my Dad.
  9. Dad's Clock

    Dad's Clock

    Clocks made by my Dad.
  10. Dad's Clock

    Dad's Clock

    Clocks made by my Dad.
  11. Mantle Clock

    Mantle Clock

    More of me winging it, found a cheap clock at Big Lots just to see if i could make one like my wife grew up with, she was happy so now i have to find a nice movement. made out of Mahogany
  12. Table Clock

    Table Clock

    Table Clock
  13. fivestring

    Clock Project

    Spalted ambrosia maple with multiple coats of Waterlox Going in an art gallery in Boone, NC. Bell chime movement from Klockit. Dial from Klockit. Hopefully the pics show up.
  14. C

    Mantle Clock completed

    I just got my mantle clock back from the clock shop. I made this clock out of red oak. I had the clock master put in a 7 day Hermle triple chime movement. It is a gift for my sister, she graduated from nursing school earlier this year. It is a gift for graduation, birthday, Christmas, and a...
  15. hpetty

    Clock that runs at 1/4 speed

    Somewhat OT for woodworking, but... I have Ben Franklin clock for which I need a new movement - electric is okay. A Ben Franklin clock only has one hand and it makes one revolution every four hours. The dial is split into four quadrants with each section representing one hour in time and those...
  16. C

    Rough picture of my mantle clock

    Very rough, no sanding but here is some pieces I have made. Should be able to start sanding and assembly this weekend. http://clowman.spryken.com/clock/index.htm
  17. C

    A door for my clock

    Question time again...... I am nearly finished with the woodworking part of my mantle clock. The last piece I need to make is the door. Please take the time to look at the larger image of this clock by clicking here, then clicking on the image of the clock. Notice the router work on the...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top