Hi-
I need to buy/rent (or donations gratefully accepted!!) a short amount of time on a large thickness sander in short travel distance of Raleigh, NC.
I'm working on a butcher block counter top. 28.5"x52"x2.25" thick. I chipped a few places on some glue joints when scraping the glue prior to belt/finish sanding, and am in hopes of being able to run it through a thickness sander 3-4 time on the face to get it evened out. Looks like I need to take it down about 1/32-1/16 inch.
If not, back to the 80grit on the belt sander!
Richard
I need to buy/rent (or donations gratefully accepted!!) a short amount of time on a large thickness sander in short travel distance of Raleigh, NC.
I'm working on a butcher block counter top. 28.5"x52"x2.25" thick. I chipped a few places on some glue joints when scraping the glue prior to belt/finish sanding, and am in hopes of being able to run it through a thickness sander 3-4 time on the face to get it evened out. Looks like I need to take it down about 1/32-1/16 inch.
If not, back to the 80grit on the belt sander!
Richard