resaw

  1. gordonmt

    resaw jig needed

    Some time back there was some discussion on a bandsaw jig used for resawing lumber. I went through the search function but could not find it. Can anyone submitt there picture of a resaw setup for a bandsaw that I could clone. I have a bunch of new wood now that needs attention and I really...
  2. Rob

    Re-saw sled for band saw

    Finished this up yesterday and put it to work. Works awesome. Got the plans from a back issue of wood magazine. And the finished pile, this is great for cutting logs into thich boards for bowl blanks.
  3. T

    Resaw King Blades $99

    Hey guys Tim Lory over at Laguna Tools is offering 93 1/2 x 3/4 and 105 x 3/4 Resaw King blades for $99. Theses fit most 14 inch bandsaws. Thought I,d pass it along. Tim,s no is 1-800-234-1976 ext 9617, Tell him Tommy sent you for the discount, Thanks, Tommy
  4. T

    5/8 x 93 1/2 Resaw Blade $14

    www.lagunatools.com has their Shear Force Resaw blade B1G1. Their 5/8 x 93 1/2 are $28.05 making them $14 a piece. They have a good reputation and thats a great price as well. Tell em I sent ya, Tommy
  5. rcflyer23

    Cedar Dry then Resaw or Resaw and Dry

    I just found out I am going to get probably close to 4 trees worth of Cedar from my inlaws yard they just cut them down. I don't know if he has sealed it yet or not but I will get that taken care of. My question is should I have it resawn and then let it dry or just let it dry in log form. I...
    • rcflyer23
    • Thread
    • cedar dry resaw
    • Replies: 11
    • Forum: Wood
  6. PChristy

    Resaw question

    With my type of wood working(small) I sometimes have to have thin pieces - I only have a table top BS and it is on its last leg - the ? is - Is it safe to resaw on a table saw and if so is there a blade recommened for this for the TS
  7. flatheadfisher

    Resaw Question From an Ignorant

    I have never used a bandsaw so I have no idea about how to use them for resawing. I want to make some maple cabinet doors and drawer fronts for the kitchen project. I have lots of 8/4 cutoffs that are big enough to use for this purpose. Could I use a bandsaw to resaw these cutoffs to make the...
  8. K

    Resaw services

    I hope I am in the right forum. I am looking for someone in the Carolina's, Virginia area that does resawing for the trade. I have a collection of wood for making acoustic guitars and need to have it resawn into backs and sides. I have more than I can ever use and want to start selling some...
  9. steviegwood

    Re-Saw Question

    Hi Y'all, I have not yet gotten my band saw but am seriously looking at the Grizzly 19" model G0514X2 Extreme Series heavy duty 3hp with 12" re-saw capability. Well maybe a couple of questions. Does anyone have one of these saws? What are your opinions of this saw? Now for the original question...
  10. jsjordan

    Resaw Fence for Bandsaw

    Here is a resaw fence I built for my Delta 14" bandsaw. It is simple and works great! :mrgreen:
  11. G_ville_worker

    Do you really use 12" resaw?

    Hi, Long time lurker, first time poster here. I'm looking to make a band saw purchase soon. I was wondering, those of you who use your band saws regularly, how often do you really need 12" of resaw? Is a 14" saw with a riser going to work well? I've seen some discussion about not really...
  12. Bas

    Resaw woes

    I'm having trouble resawing on my 14" Grizzly G0555 band saw (no riser block). I messed up some of Todd's (tv) pieces last week, and didn't fare any better slicing some of my own sycamore boards. I'm using a shop made fence (6") tall that I clamp to the stock fence. The blade is a 1/2"...
  13. jonnyfontaine

    wide boards need jointer and resaw

    hi... i am looking to get a 15/16" thick x 8" wide x 20" long board of curly maple resawn into two 1/4" boards and one 3/16" veneer (if possible) and also 2, 2" thick x 7" wide x 19" long boards of mahogany resawn to get an 3/16" veneer from each, and then have the mahogany and 1/4" thick curly...
  14. CarvedTones

    Resaw scroll work?

    Is this nuts? It seems like it might be a reasonable alternative to stacking for something I want to do in the not too distant future. I want to make a few sound board rosette rough outs. Whassat? OK, here is some back ground. I want to make something like this: and to do that, you start with...
  15. CarvedTones

    My final (HA!) bandsaw resaw report

    OK, I put the woodslicer on, adjusted the guides, made sure the belt was tight (it was a little loose), made sure the table was square to the blade, fired it up and gave it another shot... Cut that 7" spruce like butta! I cut a fairly long piece that has a pretty clean surface and only some...
  16. CarvedTones

    resaw 101 help?

    Maybe it's the saw, maybe it's the blade, maybe it's the wood, but most likely it's the sawyer... I just put my riser kit on the other night, so I don't really have much experience as the owner of a big under powered (for this task) saw. I have done a little resawing on someone else's saw, but...
  17. T

    If you need to use a Resaw.......

    I see a lot of you guys buy a bandsaw because of it's resaw capabilities. This is mine, and if you have a lot to do, or just want to make really quick work of your resawing job, come on up, over, or down to Mooresville, and use it. 25 HP motor, Variable speed, 12" width Blah, blah. Anyway...
  18. Gofor

    Resaw question

    Bought a couple slabs of plain sawn 8/4 x 8" WO today for a woodworking-bench top (Not the HM that Monty used, but should be hard enough to hold the bench dogs. For my first WW bench, I don't want to break the already-stretched budget, either). I have a couple choices: Use it flat-sawn as is...
  19. D

    How would you resaw 22+ inch wide slab?

    I've got a slab of Honduras Mahogany that I would like someday to resaw to make two single-board tabletops. It is 22+ inches wide by 2 3/4 inches thick and 42 inches long. I looked at a Laguna 37" bandsaw that looked like it would do it but at 7+ grand I decided there must be a better way (it's...
  20. M

    What type of blade to resaw oak

    OK, I am playing around with some of the willow oak that I had talked about a few months ago. These are just branches that were cut last year or so when the trees were 'pruned'. I am going to try to resaw some of it on my good ol' Craftsman bandsaw. I stepped out into the shop tonight and...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top