post

  1. cskipper

    Post window size - this may not be a new problem or not - if so need to bump it up

    It seems like the post windows used to resize when it only had a little amount of input. Didn't the avatar info used to switch to the right side?
  2. froglips

    Reported Post by froglips

    froglips has reported a post. Reason: Post: From Contact Us Form - ad palcement - srhardwoods - chrisvickers@hughes.net Forum: From Contact Us Link Assigned Moderators: N/A Posted by: srhardwoods Original Content:
  3. gator

    She's Home (Updated with Additional Post)

    Kristen came home yesterday afternoon. Four weeks after going in for tests, three weeks after going on the Heart transplant list, and two weeks after the transplant. She is doing awesomely (new word?) well. She is truly our largest Christmas present ever. She is cheery, bright, chipper and...
  4. SteveColes

    Reported Post by SteveColes

    SteveColes has reported a post. Reason: Post: Issue with website and Apple OS X? Forum: Help Desk Assigned Moderators: N/A Posted by: Deeptree Original Content:
  5. peteb301

    Reported Post by peteb301

    peteb301 has reported a post. Reason: Post: TWA Worksharp 3000 results Forum: Off Topic Assigned Moderators: ScottM, TracyP Posted by: mshel Original Content:
  6. froglips

    Reported Post by froglips

    froglips has reported a post. Reason: Post: Reduced price on farm/home Forum: Off Topic Assigned Moderators: ScottM, TracyP Posted by: Mike Davis Original Content:
  7. M

    post a reply problem

    I AM LOGGED IN and want to post a reply.... click (POST REPLY)......all I get is You are not logged in or you do not have permission to access this page. This could be due to one of several reasons: <LI class=smallfont>You are not logged in. Fill in the form at the bottom of this page and try...
  8. J

    new member post

    It is my pleasure to become acquainted with this community. I am computer literate, but just don't have the time to visit it as often as I would like to. And I do have some limitations. So, please be patient with me. Thank you in advance. First, I love hand tools and working with them. I am past...
  9. SteveColes

    Reported Post by SteveColes

    SteveColes has reported a post. Reason: Post: Interesting square Forum: Hand Tools and their Use Assigned Moderators: NZAPP1 Posted by: navy1990 Original Content:
  10. Mike Davis

    Reported Post by Mike Davis

    Mike Davis has reported a post. Reason: Post: Aromatic Red Cedar near Wilmington, NC? Forum: Wood Assigned Moderators: DaveO Posted by: JayMerritt Original Content:
  11. J

    Dual Purpose Post - WIP and Dust Collector vs Cyclone Attachment

    So, I have two goals with this post. 1. I've been working on a walnut toy box. This is my first project using rough lumber. Pictures below: Rough cut from Saw4you: Squared Stock Dry Fit of the front face - first raised panel project 2. During this project, I managed to create a giant...
  12. Crrunion

    My First Post

    Well, after a few problems logging in, which I don't understand, perhaps operator error, I was finally able to log in and I wanted to say "Hello." So "Hello." I have a couple of questions about where to buy something and about a place where I used to shop for tools, but which may be out of...
  13. K

    First post, first furniture project

    Hi All, This is my first post here. With the kids off to college, I decided to get into the woodworking hobby several months ago to occupy my time away from my day job. I like working with my hands and thought this could also be a stress relieving actvitiy as well. In addition to the miter...
  14. Bas

    Reported Post by Bas

    Bas has reported a post. Reason: Post: Junk from China! Forum: Off Topic Assigned Moderators: ScottM, TracyP Posted by: zapdafish Original Content:
  15. Bas

    Reported Post by Bas

    Bas has reported a post. Reason: Post: Junk from China! Forum: Off Topic Assigned Moderators: ScottM, TracyP Posted by: The BoardSMITH Original Content:
  16. Bas

    Reported Post by Bas

    Bas has reported a post. Reason: Post: Junk from China! Forum: Off Topic Assigned Moderators: ScottM, TracyP Posted by: Jeff Original Content:
  17. MikeH

    Reported post by MikeH

    This one hasn't gone anywhere yet, but I see potential. Just a heads up. http://www.ncwoodworker.net/forums/showthread.php?t=41495
  18. NZAPP1

    Reported Post by NZAPP1

    NZAPP1 has reported a post. Reason: Post: From Contact Us Form - Login Problem - Kirk Raymond - kirk.raymond@hotmail.com Forum: From Contact Us Link Assigned Moderators: N/A Posted by: Unregistered Original Content:
  19. Bas

    Reported Post by Bas

    Bas has reported a post. Reason: Post: 1.5 Millon tablesaw cut. Forum: Power Tools and Their Use Assigned Moderators: toolferone, ptt49er Posted by: Bill & Kay Golden Original Content:
  20. Bas

    Reported Post by Bas

    Bas has reported a post. Reason: Post: 1.5 Millon tablesaw cut. Forum: Power Tools and Their Use Assigned Moderators: toolferone, ptt49er Posted by: AmishWarlord Original Content:

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top