made

  1. erasmussen

    I made Print also

    Well it's not a national pub, just a small one. But it is print, more then I expected. http://www.newsleadernow.com/v2/content.aspx?IsHome=1&MemberID=1725&ID=10652
  2. ScottM

    Gee....I made the news

    http://www.rrdailyherald.com/articles/2010/08/16/news/doc4c6740a87df3c124573895.txt
  3. zapdafish

    made a Thein separator thnx to Splint Eastwood

    thanks to Splint Eastwood (Matt) for helping me make a Thein Separator. Turned out to be much easier than I expected. Whenever I researched it, I ended up at a site with a wall of text and would blank out trying to read it. It's a huge upgrade from my last one. It was leakey because the...
  4. dino drosas

    Scroll Saw, The devil made me do it!

    This RBI Hawk scroll saw showed up on CL here in Myrtle Beach and I just could not pass it up. It is in "like new" condition and came with many blades. The throat is 26" deep and is built like a tank. Cuts very smoothly but I feel it will do even better if taken off of the wheels. I don't know...
  5. crokett

    I Made Some Shavings!

    After a couple false starts I finally finished sharpening the #3. Not quite sharp enough to shave my arm, but it did a decent job on some test cuts in pine and poplar. :gar-Bi It cut about as well as a #4 I was comparing it to. Along the way I learned I am not all that good freehand, so may...
  6. Tarhead

    Interesting Article on Factory Made Lock Miters from 1930's

    This is cool: 1/128" of separation at the end of the joint with a moisture change from 5% to 13% ain't shabby. http://www.thisiscarpentry.com/2010/04/30/curtis-mitertite-joint/
  7. flyrod444

    Made an easy rougher today.

    I picked up a easy rougher insert last week and made a tool to mount it on today. Luckly I found the right size taps in some of my dad's old tools so my only expense was the $14.00 for the insert. I hope that it helps me rough out the oak burl blanks I have left to do. Jack
  8. S

    Home made bandsaw; youtube video available

    Matthias Wandel's woodgears.ca site was mentioned a couple months ago in a thread by Jeff Mills on ww'ing power tools made of wood. Like Jeff, I too, have been wondering about building my own bandsaw... I've been following Matthias' 18" bandsaw build at here. He just completed the saw and...
  9. Mark Stewart

    think this is the mot beautiful thing I ever made by hand

    Thanks for looking Mark
  10. Mikeprice11

    Home made Router Cabinet with Rockler Table

    Hello all, Been awhile since I posted but I try to keep an eye on whats going on. Anyways I just finished up on my router table. I bought a Rockler table and fence for my Dewalt Router. I didnt want to waste the space with just a stand so I built a cabinet. I started with some 2X4's and a...
  11. cubicdissection

    Made a Humidor

    Hey folks, long time no see...been busy farting around on other forums lately. Made a humidor recently and I thought I'd share some pics. First humidor I've ever made, fairly happy with how it turned out. I actually took pics and did a write up while I made it, which I posted on the cigar...
  12. Ken Massingale

    I Made Some Time For A Daughter

    The eldest has a b'day coming up so I knocked out a quickie little clock for her to go along with another item she has asked for. It's Walnut with sapwood and a bark inclusion on the top of the curve, and a little natural edge on the base. The front is a laminated piece of spalted Oak I've been...
  13. Bugle

    What's the strangest thing you've ever made or been asked to make?

    This should be interesting. I recently made a new handle for one of my wife's favorite pots. I carved it from hickory and painted it with heat resistant paint to match the others. Let's see what you have made that is "off the beaten path". Oh, and please post pictures if you can. Here is...
  14. Mark Stewart

    has anyone ever made stick pens

    I read an article about this some where a while back and it seems like fun. I tried a few slimline pens, not my thing. Just wondering what sise drill bits to use and that kind of thing. Thanks Mark
  15. DSC01519

    DSC01519

    Flutes Made in My Shop
    • Flute Maker
    • Media item
    • flutes in made my shop
    • Comments: 0
    • Category: Smaller Woodworking Projects
  16. DSC015071

    DSC015071

    Flutes Made in My Shop
    • Flute Maker
    • Media item
    • flutes in made my shop
    • Comments: 0
    • Category: Smaller Woodworking Projects
  17. DSC01513

    DSC01513

    Flutes Made in My Shop
    • Flute Maker
    • Media item
    • flutes in made my shop
    • Comments: 0
    • Category: Smaller Woodworking Projects
  18. DSC01506

    DSC01506

    Flutes Made in My Shop
    • Flute Maker
    • Media item
    • flutes in made my shop
    • Comments: 0
    • Category: Smaller Woodworking Projects
  19. timf67

    Made a "small" quilt rack

    So it is Christmas Eve morning and my wife comes to me and says that she needs me to make something to give to her mother the next day... :help: She and her siblings had gotten together to buy their mother a quilt rack, but said quilt rack was not available to give to her on Christmas so they...
  20. Matt Schnurbusch

    Gifts I made this year

    I have pictures of most of them. Mom wanted a single person garden bench so she got this & a maple cutting board (question on my cutting boards in another thread)... View image in gallery View image in gallery It is reclaimed red cedar with teak oil finish. No one else told me what they...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top