call

  1. flyrod444

    Turkey tracks call

    Matt Furjanic from this site made the inlay for this call. I have one more piece to try, I hope to do his work justice. This just has the first coat of finish on it. It should shane up very nice with 4 or 5 more coats on it. Jack imageimage
  2. TracyP

    BOD, Staff Conference Call (Agenda Added) 1/28/10 @ 7:30 PM

    The Board of Directors held an in person meeting today and among the topics of discussion was the need to have an open conference call type meeting that would include all of the BOD and Staff. The proposed conference call would include the entire staff of North Carolina Woodworker and should...
  3. DaveO

    What would you call it??

    I've been tasked to make something to go in our foyer near the front door. It's main purpose will be to hold all the shoes required by my wife and daughter. I am picturing it as a place to sit down and put-on/take-off shoes, as well as having some LARGE drawers where all the shoes can be stored...
  4. ScottM

    Last call for discounted NCWW calendars

    Just a reminder that you have until Monday noon, 11/30, to order a NCWW calendar for $17.00 and save $5.95 over the single issue price. Remember these calendars make great Christmas gifts and are a wondeful addition to any workshop.
  5. J

    When is TOO LATE to call?

    Almost every night, I hit craigslist, usually after 9:00 PM. The other night an item of interest (read CHEAP) appeared about 10:30 PM, with a phone number. Being the gentleman that I am, plus my mother would have killed me for calling anyone after 9:00 PM, I waited till next morning to call. The...
  6. CrealBilly

    I could call and ask Fred...

    But I figured I'd ask here so you guys can poke fun at me. I'm not sure what the joint is called but I cut it with a dado stack on the tablesaw, so I guess it's call a dado :dontknow:. Anyways when joining a case side to a bottom you cut wide groove in the side of the case it's the same width...
  7. K

    Klingspor needs a officer to call them.

    I sent them an email this morning for the online site discount. I got a request from them for an updated roster from a club officer. I have the information in an email but I was unsure who I should sent it to. Let me know and I can forward the email along. Wes
    • Kicbak
    • Thread
    • call klingspor officer
    • Replies: 10
    • Forum: Help Desk
  8. Douglas Robinson

    Update: Call with Non-profit Lawyer

    Purusant to the last BoD meeting I have begun the engagement of the lawyer. He will be sending an engagement letter to Travis's address, we will execute it and send it witha retainer back the Michael. (BTW: His office is across from the Crabtree mall). FYI: He is going to need a copy of our...
  9. scsmith42

    Minutes from the BOD call on 10-28-09

    All - please advise me if I should make any changes or clarifications before entering these into the corporate records. Thanks. Scott MINUTES OF BOARD OF DIRECTORS OF NORTH CAROLINA WOODWORKER, INC. A meeting of the Board of Directors of the Corporation was held on October 28, 2009...
  10. scsmith42

    REVISED Minutes from the 10/7/09 BOD call

    All: Based upon Rob's feedback (Thanks Rob!), I have revised the minutes from last night's BOD call. Due to their length, they will be separated into two posts. Scott MINUTES OF BOARD OF DIRECTORS OF NORTH CAROLINA WOODWORKER, INC. A meeting of the Board of Directors of the...
  11. Cocobolo Duck Call

    Cocobolo Duck Call

    Cocobolo Duck Call
    • Ken Massingale
    • Media item
    • call cocobolo duck mallard
    • Comments: 0
    • Category: Spindle Work - 2010 Calendar Contest
  12. Gotcha6

    Last call for riders to the picnic!

    I'll be leaving the Monroe/Indian Trail area around 6:00 Saturday morning. Going via US 601 through Midland to Mt. Pleasant, & NC49 to Asheboro. I can do a hookup anywhere on or near that way. PM me by 8:00 Friday for a confirmation.
  13. merrill77

    close call - kickback

    Well, I knew it was going to happen. I was ripping a bevel on a long, thin piece of hardboard. I have a right-tilt saw...and was not using a hold-down on the fence. I had just completed this operation earlier, but the smooth side of the hardboard was down and the rough side was up -- making it...
  14. edsmach1

    Yea, call me a newbie,

    Hello, I joined yesterday, Thanks Dave for re-directing me to the correct location to intro myself. I'm 52 years young, " so everyone tells me" married, 2 grown girls. They are out of the house now, now we have new kids, the boys are the "shih_tzu dogs and a Lhapso Apso (not pictured). They're...
  15. Threejs

    Turkey Call

    First, I have to thank Flyrod444 for his help on this. He answered several questions, and got me going in the right direction. This is another Christmas present for this year. It is a turkey call made from cherry and slate. The striker is purple heart and cherry. I was surprised at how...
  16. welldigger

    Close Call

    I was putting a 7 deg. bevel on a 1/2" X 2" X 16" piece of maple on the TS awhile ago. I used a feather board and a thin push stick. Just before I completed the cut, the off cut wedged between the throat plate and the blade, stalling the motor and pushing the work piece through the throat...
  17. NCTurner

    Call for help...

    OK, so I am a new turner and have been having a problem. I have looked everywhere, but can't seem to find an answer to it. So the problem: After turning a new piece I have been ending up with some very rough spots where the the graing appears to be "looser," even after extensive sanding, and...
  18. Goose Call

    Goose Call

    Using a pattern supplied by Jackleg, I turned this goose call from Black Walnut.
    • woodArtz
    • Media item
    • call goose
    • Comments: 0
    • Album: Assorted Turnings
  19. T

    Last call, carpool to Char. crawl from Ral. (FULL UP)

    I have one more space in my Dad's Camry. We are leaving my house at 5:30 am and getting back??? Come on you know you want to go (and save big bucks on gas!!)
    • toolferone
    • Thread
    • call carpool char crawl full ral
    • Replies: 7
    • Forum: User Announcements
  20. Tar Heel

    Last call for Durham Lunch Bunch on Wed. Join us if you can

    The following have said they will be at the lunch on Wed. June 4 at 12 Noon at Ole NC BBQ in Durham: Gator, DaveO, Sapwood, ebarr, glennbear, Steve, froglips, John Reeves, peteb301, and Tar Heel. Travis Porter, Rick Cornell, NC Scroller, and newtonc are maybes. If anyone else would like to...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top