QSWO Bow Arm Morris Chair. Finished with aniline dye, oil glaze and 4 coats of 321. Total of 44 tenons: 4 through tenons, 12 floating tenons and 28 traditional mortise and tenon joints.
Leather seats by Superior Finishing in Waynesville, NC
Here are a few pictures from back in April/May when I built my latest lathe. This is about the 5th one that I've done adding improvements each time. Thanks for looking.
View image in gallery
View image in gallery
View image in gallery
View image in gallery
View image in...
So I'm new here and thought I'd seek out some input on one of my tools. I have an mid 1980's Craftsman Radial Arm saw with cabinet (like this one) that my Dad gave to me.
About 6 months ago, the motor blew out on the saw. I used it to make some quick cross cuts, there was a bit of smoke...
Hi Y'all, where would be the best place to find a relatively cheap radial arm drill press. Preferably a benchtop model and even used if someone has one. Thanks. Steve
Posting says such. It's a Craftsman cast iron saw, most likely a Model 100. Currently on RDU craigslist. If I didn't already own several, I would jump on it. It is qualifies for the $100 recall, but that is a shame as they are good saws.
When I pull the trigger on the handle I can hear the motor turning but the saw is not moving. The carriage lock is free and the saw can be moved back and forth but the control cut is not engaging. I can't find any info on this in the owners manual. Is there a switch or knob I'm missing?