tenons

  1. tenon kerf jig

    tenon kerf jig

    • eyekode
    • Media item
    • for pulls tenons through wedged
    • Comments: 0
    • Category: Smaller Woodworking Projects
  2. tenon kerf jig

    tenon kerf jig

    • eyekode
    • Media item
    • for pulls tenons through wedged
    • Comments: 0
    • Category: Smaller Woodworking Projects
  3. tenon kerf jig

    tenon kerf jig

    • eyekode
    • Media item
    • for pulls tenons through wedged
    • Comments: 0
    • Category: Smaller Woodworking Projects
  4. tenon kerf jig

    tenon kerf jig

    • eyekode
    • Media item
    • for pulls tenons through wedged
    • Comments: 0
    • Category: Smaller Woodworking Projects
  5. tenon kerf jig

    tenon kerf jig

    • eyekode
    • Media item
    • for pulls tenons through wedged
    • Comments: 0
    • Category: Smaller Woodworking Projects
  6. S

    Fixing Loose fitting tenons - when to glue or when to add more wood

    Hello Everyone,Guys, I have a problem with some loose tennons. If the tennons are almost OK, that is, if they are too loose so that they slide out but don’t have much play or wiggle can they be glued or is there a glue that will help fill the small gap and make a good joint? OR… do I have to...
  7. Close_up_one_end_of_coffee_table_by stoneskipper

    Close_up_one_end_of_coffee_table_by stoneskipper

    QSS & Walnut coffee table John Skipper (stoneskipper). The different types of joinery include tongue and groove, through tenons - double and singles, notches and square pegs. The tops of the tables and the legs are curved. Through tenons attach the legs to the tops - double tenons on...
    • cskipper
    • Media item
    • coffee double table tenons through with
    • Comments: 0
    • Album: Misc
  8. F

    Cutting angled tenons

    I will be starting a new coffee table soon in which the legs will be canted out from the stretchers at a modest angle (10-15* maybe?). When cutting the M&T joints here, should i angle the mortises when i cut those or should i cut angled tenons to fit square-cut mortises? I honestly don't know...
  9. B

    need help in making tenons for a chair

    I need to find someone in the Raleigh area that has a tenon tool to turn some cedar limbs that I have to repair some adirondeck chairs. Anyone have a suggestion where i could rent, borrow, or buy cheaply a tenon tool? thanks Bob:gar-La;
  10. leftoflefty

    Mortise and Tenons

    So my sister asked me to make her a coffee table for her new house. And before I go and start tearing up nice wood for this project, I would like to practice making some M&T joints on a couple of tables for some new tools I have recently purchased. Does anyone have any suggestions on a good...
  11. timf67

    Bowl Tenons in Soft wood?

    Hey turners, I have a question and I apologize in advance for not having pics! Anyway, a friend of mine gave me an offcut of some 16/4 kd red cedar that he used to make a really nice table top. So I decided to cut it into a couple of small bowl blanks for practice. Things started well, the...
  12. mkepke

    Need efficient solution for cutting 120 tenons

    Working on another crib, this one with mortised slats. Unfortunately, I need to cut 120 tenons all sized at 1/2"x1/4"x3/4". The count would be 160 tenons, but I managed to cut 20 slats 1" too short :icon_thum so I'll be giving those loose tenons with the slot mortiser. These slats are on...
  13. JackLeg

    Help! Round Tenons?

    I need your input please. We are attempting to build some Deacon's Benches that have round legs, arm supports, etc.. We have the "flatwork" figured out, including some compound angle borings, BUT, we need to cut some round tenons on the ends. What is the easiest, and safest way to...
  14. DonEve

    Tenons for Eureopean style pens

    Hi Guys/Gals, I bought some Eureopean style pens recently, wanting to expand my horizons! I was reading through the instructions and noticed the "cut tenon to center ring" step. :elvis: Never did that, although I did find out what my parting tool is used for. Is there a posting on this...
    • DonEve
    • Thread
    • eureopean pens style tenons
    • Replies: 4
    • Forum: Woodturning
  15. J

    Corner cupboard progress--door tenons

    So I took one of my rare vacation days Friday to watch the ACC tourney. Then spent the rest of the weekend glued to the set watching the Tar Heels bring another championship home.:cool: Also snuck in some woodworking between games. Made the grooves thru grooves on both rails and stiles. Then I...
  16. BCT09 - Cutting Tenons

    BCT09 - Cutting Tenons

    Cutting shoulders for tenons in Angle Blocks for the supports for the Bubinga Countertop
    • McRabbet
    • Media item
    • bubinga tenons
    • Comments: 0
    • Album: Bubinga Countertop
  17. M

    Cutting Tenons

    Probably asked a thousand times and I know there's no one answer. But what is your preferred method of cutting tenons - on the tablesaw, router table, bandsaw, other. I have a bunch to cut and am looking for advice. These particular tenons are offset - i.e., not centered on the end. Thanks...
  18. rick7938

    Jig to Cut Mortises for Loose Tenons

    Does anyone have a plan for making a simple jig to cut mortises for loose tenons in the end-grain of a rail using a plunge router with edge guide? I have a couple of ideas, but I am soliciting better ideas. There is so much experience out there, I know that someone has the ideal solution...
  19. D

    Angled tenons

    I am making a plant stand and have come to a slight problem. I have angled the legs of the stand 5 degree, and am now going to make some aprons between the legs at the top. I was thinking of using a mortise and tenon to attach the aprons. What is the best way to cut an angled tenon? Or...
  20. DaveO

    Breadboard end tenons

    What's the best way to cut them? I have considered a dado set, but mine sucks and I wouldn't feel comfortable moving a 40" wide by 15" deep piece accross the tablesaw. I don't have a rabbet or shoulder plane so the by hand method is out. I am seriously considering a router with a straight edge...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top