primer

D
FUHR 9560 - White Primer - filler options?

Anyone working with this primer? I'm wondering what works well as a nail hole filler. Bondo caused the primer to wrinkle. I am doing trim work - pine and poplar. Thanks very much.
- DonnellyJT
- Thread
- Nov 16, 2010
- 9560 filler fuhr options primer white
- Replies: 2
- Forum: Finishing
Latex primer under oil-based paint?

I've got some oil-based porch & deck paint. And I have some latex-based wall primer. I know there was a post on this in the past few months, but my google-fu has failed me. The paint can says to prepare wood surfaces with an enamel undercoater. My wood already has paint on it, which I had...
- merrill77
- Thread
- May 2, 2010
- latex oilbased paint primer
- Replies: 10
- Forum: Finishing
Primer alone?

I know someone out there has done this - you've got your primer on the cinder block wall - it's white, which is all you want - so you don't bother with paint. Any regrets? I used Olympic's pore-filling masonry primer, mainly because it was only $10/gal. I know primer isn't as tough as paint...
- cpw
- Thread
- Apr 25, 2010
- primer
- Replies: 3
- Forum: Workshop Discussion
Best primer for this application

The loml wants this piece painted. Now please dont beat me up I lost the refinish-vs-paint battle :BangHead:. I lost several battles in this remodel It is at least 50 years old if not much older and I believe it may be shellac as DNA seams to be wanting to take the finish off or at least...
- Bryan S
- Thread
- Aug 7, 2009
- application primer
- Replies: 3
- Forum: Finishing
A Primer on Scrollsaws?

With motors so closely sized, what is an optimum HP? What features should the savvy consumer seek? Twin speed or variable speed? Table size? Is the built in light on some models easier than a light close to the table? Do all have the "sawdust blower doohickey"? Tips for tuning up a used...
- LeftyTom
- Thread
- Jun 7, 2009
- primer scrollsaws
- Replies: 15
- Forum: Power Tools and Their Use
HVLP Primer & Paint Tips Needed

Looks like tomorrow I should be in a position to begin spraying the primer (and maybe paint) on the beds I'm building for my daughter. I had read that the HVLP turbine systems in like mine (Wagner FineSpray) wouldn't do good with water-based products like paint ... so I went to Harbor Freight...
- WoodWrangler
- Thread
- Nov 10, 2007
- hvlp needed paint primer tips
- Replies: 12
- Forum: Finishing
Primer on using a Moisture Meter ?

I picked up a mini-Ligno E/D and the manual is almost non-existent. Can someone explain the 'best practices' for using a pin-type moisture meter ? For example, I've heard that you should cut off the end of a board before testing. How far back ? The meter comes stock with 3/16" pins ...
- mkepke
- Thread
- Sep 4, 2007
- meter moisture primer
- Replies: 1
- Forum: Wood
Video Review: A Blacksmithing Primer....

Howdy all. As I now send a decent % of my paycheck to smartflix, thought I'd pass along some reviews to those who are going down the long dark road of howto video addiction! https://smartflix.com/store/video/2244/A-Blacksmithing-Primer This video set is long, 3 full dvd's worth. I...
- froglips
- Thread
- Jul 27, 2007
- blacksmithing primer review video
- Replies: 0
- Forum: Reviews