gun
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
Gun Rack- Bob Carreiro
- Media item
- gun guns pistols rack
- Comments: 0
- Category: Furniture Projects
-
Gun Rack
All Oak with a lime Oak stain. The 3 1-1/2" Dia Oak dowels, have a 3/16" bronze dowel (rod) protruding from the centers to support the pistols and I used 1/8" thick neoprene pads to act as bumpers. I also used 1/2" thick, self-adhesive foam tape to line the scallops holding...- Bob Carreiro
- Media item
- gun rack
- Comments: 0
- Category: Member Galleries
-
Paslode Cordless Framing Gun - $110 (Cary)
Not mine. Not exactly for woodworking, but great for building a woodworking shop. http://raleigh.craigslist.org/tls/2765367707.html- Mike Camp
- Thread
- $110 cary cordless framing gun paslode
- Replies: 0
- Forum: Found for Sale/Hot Deals
-
flintlock gun case - sapele with wenge accents
flintlock gun case - sapele with wenge accents- BSevier
- Media item
- case flintlock gun
- Comments: 0
- Category: Smaller Woodworking Projects
-
Need finishing help for gun stock.
Hello everyone. I need some help with refinishing a gun stock. It’s a 70’s era Glenfield Model 60. Many years ago I tried to refinish it and I was never happy with how it turned out. I decided recently to try again. I have sanded it down to bare wood and now I could use some assistance on... -
Paint filter - spray gun holder
Hole in top is 4 3/4" dia.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Shelf pivots on short pieces of 1/8" dowels driven in from sides.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Low wall in front is 2" high.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Sized to fit my gravity feed gun.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Top of flip up shelf is 5" from bottom of base.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
7 1/2w x 7d x 19h. Made from 1/2" plywood.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Nail Gun recommendations
I am "in need" :wwink: of a nail gun for small projects...trim, picture frames, craft items, etc. Since I won't be using it too often, I don't want to spend a lot of money. Would you go pneumatic or electric.- Bugle
- Thread
- gun nail recommendations
- Replies: 10
- Forum: Power Tools and Their Use
-
The over/under gun pen kits
Anyone know of the best deals on these kits http://www.pennstateind.com/store/PKCP6000.html Might (hoping and praying) be getting an order for these here soon and I need to get the best price on them - thanks in advance- PChristy
- Thread
- gun kits over or under pen
- Replies: 1
- Forum: Where Can I Find, Buy or Sell?
Our Sponsors
