collector

  1. owen299

    portable dust collector ?

    Does anyone know anything about a small portable dust collector at Sears? Its 3/4 hp and seems to be a fairly good deal for $169. It looks like it would work for spot work (planer, joiner & band saw) . Also does anyone have any info. on the Oneida "dust deputy" that attaches to a shop-vac and...
  2. newtonc

    dust collector grounding

    I have a 2 hp dust collector I will be assembling permanent vaccuum lines for in the next few weeks.I was going the PVC route with short flexi hose to each machine. I have read all the studies and MIT links about grounding not being needed for a 2hp dust collector...but I am still that paranoid...
  3. woodworker2000

    Raleigh CL - Grizzly Cabinet Saw, Shaper, Dust Collector

    Not mine. 3 separate ads on CL (same seller). All items are in Youngsville (near Wake Forest): Cabinet Saw $700 - Grizzly G103 Table Saw Grizzly Shaper $400 - Grizzly Shaper Shop Fox Dust Collector $250 - Shop Fox Dust Collector
  4. SteveHall

    Clear Vue dust collector experiences/tour?

    Would anyone in the Triangle/Raleigh Area with a Clear Vue dust collector mind giving me a tour of theirs? After reading Bill Pentz's site on dust collection for a few days, I think I've nearly given up my initial impulse to get a Harbor Freight DC with the 0.5 micron Wynn Environmental...
  5. dancam

    Dust Collector Gloat

    Below are a couple of pics of a new Jet Air Filter and the HF 2HP DC. 1. The Jet Air Filter was a gift from LOML, she found a 12 hour deal on Amazon; "Jet 708620B AFS-1000B 550/702/1044 CFM 3 Speed Air Filtration System with Remote and Electrostatic Pre-Filter" Tools & Hardware; $179.99 --...
  6. MikeL

    HF Dust Collector Upgrades?

    Thanks to DaveO's coupon, I snagged the 2hp DC from HF last night for ~ $135. I have heard of several options to increase the filtering abilities of this unit. What recommendations do you have? I'm also interested in creating a small duct system with this DC. What designs have been...
  7. golfdad

    Dust Collector

    Seems I am not getting the same amount of suction that i used to with my DC How often should the upper bag be cleaned out. I am using a three micron upper bag with plastic bottom bags:eusa_thin
  8. Jay

    Wildlife Collector plate

    I have the picture to prove it. I bought a book of wildlife collector plate patterns and finished the first one for a friend who likes to bird hunt. Thanks for looking and all critique is welcome. It's the only way to learn to do better. Thanks.
  9. O

    plans for dust collector

    Does anybody have plans for a dust collector? Also, does anybody have any suggestions such as what not to use? I see some blowers here in my company and I was thinking that if maintenance gets rid of another one, I'm just going to bring it home and try to hook up a dust collection system using...
  10. Tarhead

    Deal on PSI .5 micron 36" Dust Collector Filters

    I was travelling in the Philadelphia area this week and stopped by the MLCS/PSI store. Picked up one of these for $30. PSI 1/2 Micron Cartridge - 36": Penn State Industries It had minor denting on the outside mesh at the end but the filter media was perfect. They have a few more if anyone...
  11. C

    Grizzly Dust Collector G1029Z Review

    I am looking to purchase the Grizzly Dust Collector G1029Z. I have heard good things about Grizzly products I like the 2.5 micron filter.:icon_thum 1550 CFM is also above average.:eusa_clap But before I part with my hard earned money of $295.00 + $69.25(Shipping) I need to know what other...
  12. skysharks

    Dust Collector Gate???

    I finally installed a dust collection system, using a Woodtex dustcollector that I had laying around :lol: . I ran 4" thin wall SD pvc. My question is this: I have seen people with a gate to stop the the air flow, thus increasing to another section. Where or how to build one of these gates?????
  13. smessick

    Dust Collector

    I read a now closed forum thread on dust collectors and saw a Harbor Freight Central Machinery dust collector discussed. Is this the same item? http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=45378 If so I see it available from a number of sources, including something...
  14. Tarhead

    Clearvue Cyclone Dust Collector?

    One of my quests at the IWF will be comparing dust collection options. Clearvue is one of the cyclones I'm considering but they are not participating in the show. Does anyone have one of these? Can you share your opinion please? Thanks! Mark
  15. T

    Find 7" to 6" dia. reducer for dust collector?

    I am looking for a 7" to 6" reducer for cyclone dust collector. The plumbing houses that I have checked do not carry them. Grizzly has an option but it is $58 when you buy the adapter and reducer. Seems very high to reduce a pipe diameter. :roll:
  16. J

    Dust Collector question

    Looking at a Harbor Freight Centeral Machinery dust collector, does this thing suck or what? is it worth the price or is it more trouble than it's worth? http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=45378 Thanks
  17. BIRD

    Grounding Dust Collector

    So I have this really nice Grizzly 2hp dust collector. Got the 4" black plastic tubing (can't afford the really nice metal kind) and ground wire. Accord to Grizzly, ground wire should run INSIDE the plastic tubing... ok so I did that. Didn't seem to have a problem until, I used some white pine...
  18. S

    Dust collector

    Just wondering if anyone in the group owns or can provide any feedback on the following (Jet Model: DC-650): http://www.redmond-machinery.com/newsletter_dc650special.htm 1) Is it a good deal (it sure looks like it)? 2) Will it suffice (at 650 cfm) my small shop (operating only one piece of...
  19. Travis Porter

    Dust collector pipe upgrade

    Well, I finally started installing the new pipe I got for my cyclone dust collector. For some reason I still can't decipher, I went with metal pipe again. I did not cut myself at all with what I have done so far, but leave it to me to go to the BORG and exchange some pipe that I got wrong and to...
  20. Shop 2

    Shop 2

    Table Saw, Router Table, Dust Collector, Planer, Mitre Saw
    • RandyJ
    • Media item
    • collector dust mitre planer router saw table
    • Comments: 0
    • Album: Shop

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top