I've been remodeling an old farmhouse on one corner of my property, and am recovering the outside with board and batten siding combined with live-edge siding under the eaves. All of the siding has been kiln dried. I am planing all of my siding; this past weekend we planed over 5000 square feet, and in the process filled up TWO DUMP TRUCK loads with shavings from the planer!!!).
Just for grins, I decided to make the porch trim boards from a single board. The porch is 40' long, and so I milled some 1 x 12 x 40's on my Peterson sawmill.
Here are some photos of the 40' boards during the planing process:
Scott
Just for grins, I decided to make the porch trim boards from a single board. The porch is 40' long, and so I milled some 1 x 12 x 40's on my Peterson sawmill.
Here are some photos of the 40' boards during the planing process:
Scott