Anyone Else
Anyone Else for the Jointery Class??????
I've got Tarhead, McRabbet, wsd1089, and B4man so far.
Here is the tools list.
Tools Needed
Dovetail Saw – Japanese or Western
Coping Saw
Chisels – standard set of 4 (1/4”, 3/8”, ½”, ¾”)
Mallet - I like the round head ones
Marking Gage – whatever style you like (I prefer Japanese style)
Pencils
Small pad of paper for notes if you want.
Bevel Gage
Small square – Small machinist if you have one.
Wood
You are going to want lots of practice material.
Size around 4”x12”x1/2” roughly. (As long as they are mostly the same width.)
Bring at least 8 pieces (poplar, maple, oak, whatever) (Not Pine!!!)(No Exotics!!!)
Bring some ¾” stock too – We’ll do some larger dovetailing too. (Probably some sliding dovetails too.)
PM me if you want to go. I'm PMing individuals directions.
Thanks,
John