I have a small shop where I do small stuff and some turnings on the lathe. My question is I have a dust collector from HF, I know it isn't the best but at the price I could not pass it up. I want to remove the motor and impeller assy and mount it to the block wall to allow room for the chip separator. I plan on using HVAC duct (4" or 5" to the separator), can I mount the motor assy to the wall and not have vibrations that get amplified because of the block wall. I plan on mounting it to a plywood plate across the uprights where the wood rack is mounted to the wall
Does this sound suitable? the reason I want to mount it separate is due to space and keeping the separator on the platform where the motor was mounted making it easier to roll to the door to empty.
I would take pictures but it is cold in the shop and I am thinking ahead so when it warms up I will have a good idea as to the better way to improve things.
Thanks
Does this sound suitable? the reason I want to mount it separate is due to space and keeping the separator on the platform where the motor was mounted making it easier to roll to the door to empty.
I would take pictures but it is cold in the shop and I am thinking ahead so when it warms up I will have a good idea as to the better way to improve things.
Thanks