OK, so I've finally straightened out the shop some. I swept out all the woodchips and dead spiders, and I took some pics this morning, before the woodchips started piling up again.
If you follow the pics in order, they create kind of a 360º view...
That bandsaw is gone now...
It should be pretty apparent that I'm still working on this. I still have to make doors for the two sets of upper cabinets, as well as my rolling cabinet/sharpening station. I also have to make a drawer for that counter next to the bandsaw. Other projects on the list: make a box to store/protect the Leigh D4 jig, make a real router table, and make a real workbench. When I (finally) build my new workbench, it's going to go in that space where the little worktable is in the back of the shop. I also would like to make a flip-top cabinet to go along the back wall, for my BOSS &/or scroll saw that I've never even opened... :roll:
This is a shop layout diagram that I drew up a while back, when I was still in the planning stages of the shop. I'm pretty close to this already:
Just thought I'd share... any ideas or suggestions would be appreciated!
If you follow the pics in order, they create kind of a 360º view...
That bandsaw is gone now...
It should be pretty apparent that I'm still working on this. I still have to make doors for the two sets of upper cabinets, as well as my rolling cabinet/sharpening station. I also have to make a drawer for that counter next to the bandsaw. Other projects on the list: make a box to store/protect the Leigh D4 jig, make a real router table, and make a real workbench. When I (finally) build my new workbench, it's going to go in that space where the little worktable is in the back of the shop. I also would like to make a flip-top cabinet to go along the back wall, for my BOSS &/or scroll saw that I've never even opened... :roll:
This is a shop layout diagram that I drew up a while back, when I was still in the planning stages of the shop. I'm pretty close to this already:
Just thought I'd share... any ideas or suggestions would be appreciated!
Last edited: