wip

  1. R

    New chair WIP

    Hi all, I have a new chair in progress. Actually, the wood working is done and it is ready for the finish. This is not a rocking chair, but evolved from an earlier design for a unique rocker that I may eventually make. I call this a Campeachy II chair. President Jefferson was attracted to a...
  2. Joe Scharle

    Fly Leaf Table WIP

    Thought I'd post this now even though it may take a while to finish. I started with a dining table fly leaf that had some damaged trim. You can often find these at second hand/ recycle stores for a buck or two. They make very nice hall tables and if you find one that you can make to match your...
  3. Larry Rose

    Cabinet WIP

    I got started this last week end on a new project that SWMBO wants. Its going to be a glass front and side storage cabinet for the bathroom. For those of us old enough to remember, I'm trying to make it look like a cabinet you might have seen in a Doctor or Dentist office 40 or 50 years ago. I...
  4. Joe Scharle

    Scrap wood furniture WIP

    THE CHALLENGE My youngest (only one still in college!) moved off campus this year and needs one more piece of furniture; a small table, which she will probably throw away when she moves. And she wants to pick it up tomorrow! This is what I've done so far (lunch break). I'll make the drawer...
  5. WoodWrangler

    Television stand ... WIP

    This weekend I began building a TV stand for a buddy of mine. In the end he's going to paint it black, so I'm using a variety of 'scrap' wood to make it (mainly Elm and Red Oak). It's built with mortise & tenon joints (made ever-so cleanly with the MultiRouter :icon_bigg). It's a simple...
  6. Larry Rose

    WIP: Wenge and Lacewood Table

    I was commanded....er commisioned by SWMBO to build a pair of small tables for the beach house and this is the start of the first one. It's my first experience with wenge. If you guys want to see if your tools really are sharp, get a hunk of this stuff and start gnawing on it. Man it's tough...
  7. pslamp32

    Dining Table WIP...

    My dining table is moving along, thought I'd post a few WIP pixs... A couple of questions for the experts. I made the aprons about 2". Is that enough? I hope so, I really don't want to recut all of those again. Also, does anyone in Asheville have a jointer I can use tomorrow to edge...
  8. S

    Blade storage box w/ pics (WIP)

    .
  9. Eaglesc

    WIP blank

    I have two more pens to be delivered hopefully by tomorrow nite. At this point I have this one "gauzed" for drilling. This is what is looked like when I finished it at 10:30 last nite. "Dyna blue" acriluster Black veneers and aluminum.
  10. J

    ERC Pool Deck WIP

    Well I think I got enough eastern red cedar cut and air dried this time to finish up the pool deck, no more excesses not to get it done. All that's left is to make up deck boards and beat em down on the far corner and around the edge. I did everything except cut the logs off the stump, buck em...
  11. D

    Cradle - WIP

    My latest project for my step-daughter who is expecting. The overall dimensions are 36" high X 23 1/4" wide X 44" long, and made of cherry. I found the plans on Furnitureplans.com. I like the look of the square spindles, better than I did of all the other ones I looked at. The only thing about...
  12. PeteM

    Bedside tables - WIP

    Hopefully these will get done faster than the headboard. Walnut from Jeff. The idea is from the Creole Table. They are smaller than the original and I didn't like the bent legs in the smaller size so I went with plain tapers. Joinery is loose M&T - mortises cut using the Hawk RouterShop pete
  13. Larry Rose

    WIP Fanback legs

    This weekend I turned the streachers and legs for the Fanback Windsor in progress (see previous post). Next I'll start sculpting the seat, sand and finish. BTW how do you guys who make chairs line up the borings in the seat for the legs? This is my third chair and I have more trouble with this...
  14. WoodWrangler

    Twin Beds (WIP with Pics)

    Last weekend I began the latest project for my daughter. A set of twin beds for her new bedroom as she grows out of the crib. These are made from the Elm purchased from Woodguy several weeks ago and if all goes well will be done before Thanksgiving. Thought I'd share some of the work in...
  15. Larry Rose

    WIP Fanback Windsor Chair

    As ordered by SWMBO, I got started on the first of 2 chairs for our kitchen table (2 already inplace). The seat and back are roughed out and now I'll start on the legs and streachers. The seat is poplar, the spindles are red oak and the fan is white oak. More later.
  16. JackLeg

    Glider WIP

    Here's some pics (If I can figure out the Attachment method) of the first glider we have ever attempted to build. It's from the plan shown. Hope this works!
  17. Larry Rose

    WIP Pedestal Table

    After the most of our heat wave got over I finally got back to work in the shop. This is the table based on an earlier thread of a sketch I did. If anyone remembers it, I chickened out on the reeding arount the pedestal. Maybe next time. The table is walnut and rosewood veneer or so the package...
  18. S

    Desk WIP

    Still working on this desk. Seems it's been all over my garage/shop all summer. Guess it's been too hot and I've been too sorry. Still lots of work to do before starting on the top, but here goes. Sorry about the thread instead of the pix, but I'm definitely computer challenged. :BangHead...
  19. T

    Bathroom Vanity WIP

    I have been working on a bathroom vanity for a couple weeks now and have run into my first question. Some of you may remember the Shaker style vanity that was in Workbench several years ago. I will be building a variation of that out of walnut. At this point I am about to assemble the sides...
  20. C

    Workbench WIP

    Started dimensioning the stock Sunday using some 14/4 and 15/4 oak planks I got from DaveO about a year ago. I dimensioned oversized, let sit for a day and dimensioned to final size. Worked on M&T joints evenings this week and have managed to complete the base joinery. I still need to profile...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top