small

  1. CarvedTones

    Anyone up for a small group buy of pure tung oil?

    This is the best deal I have found: http://antiquesupply.com/products/GOLDEN_S_PURE_TUNG_OIL_5_GL-3279-549.html I emailed them and it is about $23 to ship, no tax in NC, so it is slightly over $38 a gallon. Locally, it is about $55 a gallon plus tax. Any interest? EDIT - Closing thread...
  2. J

    small tool gloat

    Finally got my 8" Delta bench grinder from Lowe's. I paid $60.00 for this $139.00 grinder, new in box. View image in gallery
  3. CarvedTones

    small parts sled

    This is for cutting small to tiny parts on the tablesaw. The TS seems somewhat like overkill for some things this small, but it is much easier to get very accurate repeatedly and cut small adjustments. Anyway, here it is with a little chunk of ebony about to cut a nut for a medieval fiddle...
  4. JOAT

    Tool column for small shop

    Hi guys. Been awhile. I've been hanging out with some metalworking guys, learning a lot. Awhile back I posted about a take-apart workbench I made. Worked just as expected. However. Took up a lot of valuable floor space in my 8X12 shop, and about killed my back when I used it, because...
  5. MarkE

    Another Small Tool Gloat

    I am on a roll. UPS just dropped off my new PC Variable Speed ROS. I may have to take the day off tomorrow so I can play with my new toys. :eusa_danc
  6. MarkE

    A Small Tool Gloat

    I have made a few small projects using pocket hole joinery with a Kreg Jig. One of the small portable jigs with 2 holes. Well, I am in the process of building a changing table/dresser for my Granddaughter using some plans my Daughter picked out. The plans called for lots of doweled joints...
  7. flyrod444

    What to do with a small burl.

    I cut a small burl off a log I cored a set of bowls from a few months ago. This is how I used it. It is around 4 1/2" wide by 4" tall. The last bowl is a form I turned from a piece of maple from the same tree. It is 7" tall. Jack imageimage imageimage imageimage
  8. JackLeg

    Small Gloat from "The Source"

    Well, I went over to the Woodworking Source today with my friend to so he could purchase some alder for his new kitchen cabinets he's building. THAT was my first mistake!! :eusa_thin I saw this thing, and began salivating and my pulse rate increased. So, naturally, to offset those...
  9. steviegwood

    Small 4x4 Dump Truck W/Snow Plow Wanted

    hi folks, the wife and i will be looking for a small dump truck 4x4 with snow blade preferred. we could put a blade on later. we have a dodge dakota and want to go to a full size truck but also need a snow plow and dump. if we can find a dump reasonable enough we can just get a 1/2 ton truck for...
  10. S

    holding down small pieces

    I have a commission that involves carving a number of small pieces from quarter sawn oak. These are pieces to be attached to a hall tree. I am having trouble holding the pieces in place while carving them. They can not be screwed in place or nailed in place. The pieces will have to be held in...
  11. CarvedTones

    customizing small carving gouge handles

    I just ordered a few Warren gouge blades. You can see them on the lower left of this page: http://www.warrencutlery.com/indexb.htm I have one of the little gouges on the lower right, the ever popular 3/4" fish tail 4 sweep, and while it is one of my favorites, it is not just a handled version of...
  12. box

    box

    small box
    • HERIJOBR
    • Media item
    • box small
    • Comments: 0
    • Category: Member Galleries
  13. another small box

    another small box

    box
    • HERIJOBR
    • Media item
    • box small
    • Comments: 0
    • Category: Member Galleries
  14. cedar box

    cedar box

    small box
    • HERIJOBR
    • Media item
    • box small
    • Comments: 0
    • Category: Member Galleries
  15. box

    box

    small box
    • HERIJOBR
    • Media item
    • box small
    • Comments: 0
    • Category: Member Galleries
  16. daughters keep sake box

    daughters keep sake box

    small box
    • HERIJOBR
    • Media item
    • box small
    • Comments: 0
    • Category: Member Galleries
  17. rcflyer23

    Small Country table

    I always seem to forget to take in progress shots. So here is the final project. This is another small table that I have been working on that I finally assembled and finished. View image in gallery View image in gallery View image in gallery
  18. B

    Small foot stools

    These stools seemed popular this Christmas, so I thought I'd post a few shots of the process and end results. The top is 8x15x1-1/4", overall footprint 8-1/2x8-1/2x15-3/4. Legs are splayed 12º in two directions. To get the tenon to exactly fit (.003 smaller) the hole, I had to use a metal...
  19. timf67

    Made a "small" quilt rack

    So it is Christmas Eve morning and my wife comes to me and says that she needs me to make something to give to her mother the next day... :help: She and her siblings had gotten together to buy their mother a quilt rack, but said quilt rack was not available to give to her on Christmas so they...
  20. PChristy

    For the small stuff

    Performance W1709 36 Pc Hobby Knife Set Price:$27.05 Sale Price $13.99 + UPS $5.00 shipping http://auto.tooliday.com/...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top