small

  1. S

    where to buy small brass knobs?

    .
  2. ebarr

    Small plate rack project

    LOML wanted too store our plates in the cabinets vertical instead of horizontally. So I came up with this. My math was off just slightly on the last large plate before the smaller plates start. It looks farther behind the center piece it in the photo than it really is. the dowel is actually...
  3. Bas

    Very small screws

    Managed to successfully drive home 9 screws, but snapped the head off #10. Arg. I need a very small philips head brass screw, #1, 3/8" long (actually 7/16"). There are several sources on-line, but that would mean I end up with a box of 100 plus $4 shipping. That seems overkill for ONE screw...
  4. manfre

    Managing Dust in a small workshop

    I'm having my first workshop built. A relatively small 12' x 20' barn style shed. The side walls are 7' tall and the center peak is 13'. I am planning for the toys that I need for the shop and I have no clue what is needed for managing dust. The shop will definitely have a lathe, 8" grinder...
  5. MarkE

    A small gloat

    I was perusing Craigslist yesterday when I came across an ad for some desk drawer units. By the time our emails crossed paths, most of the units advertised had been spoken for. I decided to take the trip up to Raleigh today anyway and check out what was left. I came home with the this pile of...
  6. Dcoop

    Small Wooden Crosses

    Where can I find small wooden crosses for inlay work? The size I am looking for is 1 1/8 inches wide, 1 1/2 inches tall and 1/8 inch thick. Thanks in advance for your assistance.:notworthy:
  7. erasmussen

    small Turning

    Just a little something to keep me busy 273 pieces Thanks for looking
  8. b4man

    Need ideas for a small NCwoodworker sign

    I want to have a NCWW logo sign of some sort at the Heartstrings Memory Walk to put on the table where we will distribute the angels. Does anyone have suggestions as to how and where I can get one printed? I think a 8" x 24" would work well. The table is a standard folding banquet type...
  9. flyrod444

    Small HF

    I had this small bump of a burl on a large blank of ambrosia maple last year so I thought it was worth turning something from. The form is around 5" in dia. by 4" high. It is finished with deft. Jack
  10. bosch router

    bosch router

    Got this at a local building supply for $125 on sale.
    • jmauldin
    • Media item
    • a gloat small
    • Comments: 0
    • Category: Tools & Equipment Photos
  11. S

    PE request (small item): Hillsborough, NC to Washington, NC

    I need to move a small item (a bandsaw fence) from Hillsborough, NC to Washington, NC. The fence would easily fit in the seat, floor, or trunk of a car or truck. Anyone coming this way in the near future? Thanks, J
  12. Small Cabinet

    Small Cabinet

    Small Cabinet
    • JeepMr
    • Media item
    • cabinet small
    • Comments: 1
    • Category: Furniture - 2011 Calendar Contest
  13. Jim M.

    Small tool gloat

    I had another good find today at my favorite pawnshop. A Porter-Cable 390K ROS, it's in new condition and works great. I was able to get it for $31 w/tax and came with a 30 day guarantee. :banana: Jim View image in gallery
  14. S

    Small old tool gloat then

    Been busy for the last few weeks. Alot has been going on. This is what I've added to my mess. Ingersoil Rand compressor model SS3 (need manual) Craftsman 15in drill press (need manual) Delta 1 in sander with 8 inch disk old bench wood vise Cole bench vise. Great shape and what...
  15. Touchwood

    Small gloat and FREE Router table

    Hi All, Sometime in the dim dark past I built a router table using plans from Woodsmith circa 1985 or so. Every piece I've built since then was done using this table. Here it is It uses holes cut in Duron hardboard for "snap-rings" and is drilled for a Sears Craftsman or Makita 3612BR...
  16. tjgreen

    small yard sale gloat

    Wasn't able to get to the Liberty Antiques festival, but I did pass a yard sale on Saturday on my way to Hillsborough. Not a whole lot of great stuff, but I did find some useful items - a brass screwdriver with a mini screwdriver in the back, a North bros (post-Stanley) Yankee screwdriver in...
  17. Mark Stewart

    looking for a small dogwood tree

    Hi there Im looking for a small dogwood tree to make a cane out of. If any one has one let me know and well try to work out something. Thanks Mark
  18. steviegwood

    Small Finishing Glaot

    Hi Y'all, I stopped in at out local 84 lumber yesterday and they had 5 pints of lemon oil out on a table of discontinued items. When i asked the price and he said .50 a bottle. Well the rest is history, they do not have anymore lemon oil. Just thought to share this. Steve
  19. sightandsounds

    Quality Saw For A Small Shop

    In the short while I've owned the Craftsman table saw that I bought for $40 off of Craigslist, I have learned to despise it. Fortunately for me, the saw came to a screeching halt today as smoke poured out of the motor. I think it's time to upgrade.:icon_cheers I don't want another...
  20. crokett

    Small Engine Question

    My riding mower won't turn over when starting. It is acting like the battery but both Auto Zone and Batteries Plus say it is good. Batteries Plus actually tested it under load. It is not the solenoid, I took a jumper cable direct from battery to starter. It will start if I jump it off a car...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top