raised

  1. King Size Raised Panel Red Oak Bed

    King Size Raised Panel Red Oak Bed

    The wood came from an old tree in my neighbor's yard. It was well worth the time it took to mill and dry the lumber.
    • Dusty Sawyer
    • Media item
    • bed milling oak panel raised red
    • Comments: 0
    • Album: 2008 - 2009 work
  2. Raised_Beds

    Raised_Beds

    2 4x8 and 1 pole bean tripod made out of cedar
    • SGalley
    • Media item
    • beds garden raised
    • Comments: 0
    • Category: Member Galleries
  3. Trellis

    Trellis

    Melons in the middle boxes and Tomatoes in the end boxes
    • SGalley
    • Media item
    • beds garden raised
    • Comments: 0
    • Category: Member Galleries
  4. Drip Irrigation

    Drip Irrigation

    • SGalley
    • Media item
    • beds garden raised
    • Comments: 0
    • Category: Member Galleries
  5. Raised Garden Bed

    Raised Garden Bed

    2'Hx5'Wx10'L Treated 2/12's Inside bottom screened. Inside bottom & walls lined with landscape fabric. 4 yds garden-mix soil trucked in.
    • Bob Carreiro
    • Media item
    • garden raised
    • Comments: 0
    • Category: Member Galleries
  6. pbaileyjr

    Raised plant beds

    My wife wants me to build her a couple of raised plant beds. She doesn't want treated wood used. Is cypress a good alternative? Would there be something better that would last longer?
  7. S

    RAISED PANEL ROUTER BIT SET - $75 (NW Raleigh)

    not mine http://raleigh.craigslist.org/tls/2249158088.html RAISED PANEL ROUTER BIT SET - $75 (NW Raleigh) Date: 2011-03-05, 4:26PM EST Reply to: see below BOSCH RAISED PANEL ROUTER BIT SET INCLUDES M CARBIDE BITS: Raised panel bit: 1 1/2” cut, 5/8’ deep, ½’ shank Beading Rail...
  8. J

    Wtb, wooden, raised, panel, doors,

    I need a number of raised panel doors wooden.is there a local supplier with a fairly quick turn around Thanks Dwight
  9. GarageWoodworks

    G&G Raised Dog Feeder

    Hey Gang! I just finished this G&G style dog feeder. It is made from cherry w/ ebony plugs and splines. It is finished with several coats of sprayed poly (hvlp). Thanks for looking. I made a video detailing how I made the 'indent detail'. You can see it here...
  10. Canuck

    Peachtree Raised Panel Bits

    Peachtree are currently running a 50% off sale on the StoneMountain raised Panel router bit sets. Here.... http://www.ptreeusa.com/edirect_021610.htm I have not personally used this brand of router bit, but thought I would pass it along if anyone is interested. Wayne
  11. CrealBilly

    HF Raised Panel set

    Without opening old wounds... I had a nice raised panel rail and stile router bit set from Freud. I let a friend borrow it and he hit a nail with one of the bits, he replaced it with the harbor freight set pictured below. Now I was not happy about my new set from HF but you know the guys is just...
  12. B

    Raised panels on the shaper

    Just did up these photos so I thought I would share them here. This is a shop-made fence for doing raised panels safely. Edgeband a piece of 3/4 plywood with hard wood like maple. Drill a hole for the spindle. Clamp the plywood. Install the cutter and lower the cutter into the wood to make...
  13. S

    Raised Panel Help

    Can someone point/advise me on the right technique for building a raised panel door (small cab)/ I have a set of the MLCS pro panel bits, and checked out their help section, but the information is critically lacking technique. I got the correct profiles for the Stile and Rail and they match...
  14. Bigdog72

    Raised panel doors

    What is the best clamp for use with raised panel doors? F-style or K bodies?
  15. Raised Panel Door using Panel Jig

    Raised Panel Door using Panel Jig

    Birch door 33'' high by 24'' wide made on tablesaw using Panel Jig -- used in Walsh Project
    • McRabbet
    • Media item
    • door panel raised
    • Comments: 0
    • Album: My Shop
  16. Bigdog72

    Raised Panel Door Templates

    I am considering buying a set of cathedral door templates from Peachtree. Anyone have any experience with these or other brands? Pros and cons? Thanks in advance for your help!!
  17. MikeL

    Raised stand for lathe and lighting

    Today I decided to finally build a stand to increase the working height of my lathe. I used some salvaged plywood and 2x4's along with a pack of adjustable feet from Hartville Tool (they are nice :icon_thum). Since I never throw anything away, I took our old track lighting that was...
    • MikeL
    • Thread
    • lathe lighting raised stand
    • Replies: 10
    • Forum: Woodturning
  18. KC7CN

    Question Raised Panel Doors Glue Up

    I recently purchased the Freud 2+2 Raised Panel Bit Set, and made my first set of doors for a sewing cabinet. The doors are 3/4" Red Oak, 23"W x 25"H. Rails and stiles are 3-1/4"W. Each door has two panels - separated with a 2-1/4" muntin. Door frame without panels. I routed the door...
  19. Raised Panel Door

    Raised Panel Door

    First raised panel door. Material is Alder
    • KC7CN
    • Media item
    • door panel raised
    • Comments: 0
    • Album: Miscellaneous Pictures
  20. K

    Raised panels- new Woodsmith

    Just finished a quick scan of the raised panel bits article in the new WS mag. It brought to mind something I have struggled with in the past when making raised panels. This struggle is one of the reasons I have not made many raised panels. I have always made the panels stand proud of the rails...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top