1. D

    Powermatic 209HH 20" Planer, Helical Head, Like New (Charlotte/Asheville)

    Like new, never used, 209HH purchased in 2018 from Woodcraft in Matthews, NC. I wound up using my Felder instead of this and never made anything big enough that required it. New it was $5900-10%+tax and shipping. Would like to see $4800 for it. I can deliver locally for an additional fee...
  2. mpholway

    SOLD - Dewalt DW 735 Planer with ALL of the extras $850

    This item is being listed as I have just upgraded to an 15 inch and need to clear space in my shop. I am listing it here first and will not post to C/L or local marketplace until after the weekend to give any of you first chance at it. Great planer for a smaller shop as it does not take up...
  3. 7

    Like New Sawstop 3HP/Grizzly Planer/Joiner Etc.

    I am looking to sell my barely used woodworking equipment. I work full-time as a police officer and I started doing woodworking on the side a while back with minimal tools. I was really enjoying it and decided to buy all this equipment. Right after I bought the equipment a lot of things...
  4. J

    New to Raleigh area

    Hey everybody. My name is Joe and I just moved down here about 5 months ago from Long Island, NY. I am doing a project and have (6) 2x8's that I need to have planed a little bit. Would anybody know where I would be able to get this done? I am willing to pay for the service, I am not looking for...
  5. W

    22" Powermatic Helical Head planer for sale

    3-phase Powermatic 22" single helical head planer for sale. Asking $6000. (new is close to $12,000) Pickup in Wilmington. I bought a new one last April and this one is taking up space. Needs new bearings on infeed and outfeed rollers.
  6. N

    Full Shop sale

    I live in Cary, NC and am liquidating my shop. Moving and change in life circumstances. All listed tools are less than 1.5 years old and have not seen heavy use. I was making furniture for friends/family mainly. If you're interested in anything, please send me a message. Not everything is...
  7. R

    SOLD - Makita 2012 planer

    Makita 2012 - 12” planer. Knives were replaced about 6 months ago and have minimal use and have not been flipped yet. Runs great. I also added the dust collector hood which works really well. Just 2 screws to remove if you don’t want to connect to your dust collector. I went through and cleaned...
  8. Grit12Gauge

    Jointer then Planer or vice versa?

    Working on purchasing more equipment for my shop and initially I wanted to get a jointer then a planer. First off, is this the correct purchase order? After doing countless hours of YouTube research and not finding answers, I ask the question.... do I really need a planer if I’m getting a...
  9. S

    Inca 10” jointer/planer for sale

    I am getting a larger unit so I am moving my original unit out. $300 picked up in Cary.
  10. J

    FOR SALE: Dewalt 733 Planer

    Planer is in excellent operating condition. I just have gotten a larger fixed base planer and only have so much room... Planer is mounted on a flip top table with casters. Has outfeed tables and dust collection connection. Table also has a Rigid EB4424 Oscillating Belt Sander, also with dust...
  11. charlessenf

    Grizzly 15" Planer G 1021 Auction

    Grizzly 15" Planer G 1021, 220vac works well. Sold as is where is. Auction Ends: 10/19/18 5:45 PM ET Remaining: 13 Days 1 Hr Refresh Bid & Time Starting Bid: $300.00 Bids: 1 High Bidder: s***********c...
  12. BKHam

    anybody have a cutech "spiral" head planer?

    My situation: I would like to have a helical spiral head on at least a planer for all the reasons that anybody else would get one...quieter, easily replaceable, less tear out. I have the Dewalt 735 with straight knives. I have a older powermatic 8 inch jointer as well. i could sell both...
  13. charlessenf

    Woodmaster 718 Planer/Sander/Moulder - $1600 (Abingdon) American made Woodmaster 718 Planer/Drum Sander/Moulder with new Titan Knives and new sandpaper on drum. This planer has a cutting area of 18 1/8" X 6 3/4". I have the single moulding head, accessory shaft drum sander and extra...
  14. K

    Anyone have a planer and willing to help me out?

    Hey everyone, I have four wood slabs I want to plane flat so I can finish up my coffee tables, 3 of the dimensions are about 44”x~21”x2”, the other one has one side over 25" in length so I am not sure I'll be able to plane that one. They are white oak, no nails or metal in them. I don't have...
  15. charlessenf

    Woodmaster 712 Planer Attachment - $50 Asheville, NC

    "I have an attachment for my Woodmaster 712 Planer (1994) that I believe is a jointer or molder accessory attachment. I have never used it before and it is taking up valuable workshop space, so I would like to sell it. Contact Ben by text at 434-249-0257 if interested and include Woodmaster in...
  16. jonnyfontaine

    Cutech spiral head vs dewalt 735

    Has anyone compared a cutech with a spiral head to a dewalt 735? It seems the Dewalt 735 is the current king of bench top planers but I've been looking at the cutech model, especially with the one with a spiral cutter. Can amyone way in on this as I've never used a cutech planer. Thanks so much
  17. M

    Need Help: I don't own a Planer, anyone in Charlotte area willing to help?

    I do not own a planer, and I am working on making a barnwood counter top for a bar I am putting together over my spring break. The boards I have are beautiful, but are weathered and have some warp to them. I was hoping to be able to run them through a planer to be able to make a nice flush...
  18. charlessenf

    Need to Build DeWalt 735 Planer Stand with in/outfeed support - Anyone aleready build one?

    Would you believe a six-hundred dollar planer with not feed tables!? I sold off my 15 year old HD Ridgid and went for the Two-speed, Three-blade DeWalt thinking 'upgrade.' Then I discover the feed tables that come with the $369 Ridgid are an extra, special-order item (at Lowes). While...
  19. G1033Z 20" Planers ( got for $600 ).

    G1033Z 20" Planers ( got for $600 ).

    Bought this 15 year old planer used in December and it is in great shape. Took a bit of setup but really nice planer. Maybe put a Byrd head in it in the future. To help quiet it down. When the dust extraction hits those blades this thing sound like a a jet engine.
  20. G1033Z 20" Planers ( got for $600 ).

    G1033Z 20" Planers ( got for $600 ).

    Bought this 15 year old planer used in December and it is in great shape. Took a bit of setup but really nice planer. Maybe put a Byrd head in it in the future. To help quiet it down. When the dust extraction hits those blades this thing sound like a a jet engine.

Our Sponsors