hvac

  1. W

    Tile wall to drywall bathroom remodel - hvac supply fix

    My mother had her bathroom remodeled from 60s style thick half wall tiles to drywall, but the drywall is thinner than the now removed tile wall. The problem I noticed is that the hvac supply vent sits away from the drywall. And the hvac duct is fixed inside the wall. I am wondering if anyone...
  2. jamie

    HVAC in garage shop?

    It has been a while since I have posted... I have a shop in my garage - about half of a three-car garage, also shared with a car and lots and lots of storage. It isn't that often that I can actually do anything out there- it is way too hot in the summer, and barely bearable in the winter. The...
  3. J

    HVAC question

    Air conditioning/fans off this morning. Nothing running. I noticed air flow coming in through the floor vents by just putting my hand on the grille. The ducts, registers, air returns, etc. were sealed with mastic a few years ago so I'm thinking that the air flow is coming in from WITHIN the...
  4. Glennbear

    GE/Sharp HVAC Recall

    The CPSC has announced the recall of certain GE/Sharp HVAC units. It is not likely that many of us have them but just in case: http://www.cpsc.gov/cpscpub/prerel/prhtml11/11247.html
  5. sawduster

    HVAC in Burlington

    Does anyone do, or can recommend, a reliable HVAC tech in Burlington/Graham ? We have a split-system unit in my late grandmother's house that needs to be checked/serviced. Unit runs fine ( it seems ) but appears to have an airflow restriction somewhere :icon_scra Evaporator and duct work are...
  6. woodworker2000

    Where in N. Raleigh/Wake Forest can I get an HVAC distribution box made?

    I need to get a small HVAC distribution box built so I can tie in a couple of bathroom exhaust fans into one roof penetration. Anyone know where in North Raleigh/Wake Forest area I can get this done? If none in the N. Raleigh/Wake Forest area, anyone else in the Raleigh area? I haven't...
  7. gfernandez

    Need recommendation for HVAC contractor in Garner and Cary

    It's that time of year again, and I have 2 A/C units at the house and 1 at work that could probably benefit from a yearly tune-up. Anyone have recommendations on HVAC contractors that they have used and trusted? The contractor who built our house used WeatherMaster to install our system, and...
  8. NCTurner

    Rant Mode on---HVAC Tech in Raleigh

    It seems that after a hard weekend of work my blower motor on my furnace has decided that it doesn't want to work very well anymore. Can't say I blame it as it has been on OT all weekend. That said can anyone recommend an HVAC repair service in the Ral/Cary area? Or is changing the motor cake...
  9. D

    HVAC company recommendations

    Can anyone recommend a HVAC company they've used in the Durham area? I had the company I've used before come out to price a "through the wall" AC/Heater combo and they want over $1400 and I'll be doing most of the installation! That's doesn't include the electrical work needed either. Any...
  10. J

    HVAC contractor

    Hey All, Can anyone recommend a HVAC person or company for me to get quotes from ? I need to have my unit changed out and I am going to need duct work done also because the the house has changed in size since the original a/c and heat had been put in. I am looking to go with a dual fuel...
  11. Joe Scharle

    HVAC blower motors

    I gave up trying to find the original thread to which I thought I gave a minimal answer, so I will put this info here. Might be a good idea to cut and paste this if you plan to use one of those blowers in the future. The industry standard color code is: Black …High Speed Blue…. Med Speed Red …...
  12. brenthenze

    shop HVAC

    There's been a lot of discussion lately about dust control, and I have a question somewhat related to that. In my new building (which is stand-alone and will be insulated), I'm going to need to have some sort of heating and air conditioning--either window a/c units and space heaters or an...
  13. T

    Small accomplishment on the shop HVAC

    I know no pics, didn't happen, but it really is not all that great to look at. I was able to get the electrical run to both the air handler and the compressor today. Just one more thing I can check off the list :thumbs_up. The irony is that I was sweating bullets the whole time. Oh how I...
    • toolferone
    • Thread
    • accomplishment hvac shop small
    • Replies: 3
    • Forum: Workshop Discussion
  14. T

    One step closer to hvac in the shop!

    After posting for help needed. Phil S volunteered to give my brother and I a hand for a few hours. I am very excited and got done what I had hoped to. We got the main unit mounted and the flex air duct run over to a temporary plemum. Once it is hooked up I will only use it while I am in the shop...
  15. Steve W

    HVAC Needs Replacement

    Gee, we bought a house that isn't from the Victorian era, and yet I find that I still have a money pit on my hands!:kamahlitu My 18-year-old gas pack has thrown its last BTU of heat so I am in the process of replacing it. I plan on staying with gas for the heat as much as possible, so my main...
  16. R

    HVAC In The Shop

    I plan to add heat and air in the shop/garage. :gar-Bi The heating contractor has proposed using one of those under-the-window-and-through-the-wall units like you see in most motels. They take up a bit of wall space (42"w x 16"h), but my motel experience suggests they can move more air with...
  17. mkepke

    Anybody using ground-source HVAC ?

    Does anyone have a ground-source heatpump ? I'm looking for more information to determine if a closed-source (what's allowed in Wake Co.) HP will fit my situation. I've talked to four local contractors for Florida Heat Pump and been underwhelmed by the contractors themselves. Ground-source...
  18. chris99z71

    HVAC repair in Raleigh?

    Does anyone work in building HVAC repair? I'm now in business with a friend who owns 22 rental units. I'm taking on all of the repair/maintanence. I'm in pretty good shape between what I can do myself and the friends that I have who work in various trades...except for HVAC. Any...
  19. T

    HVAC Supply House in Raleigh, Winston, Greensboro, Hickory

    I received some great advice on another thread about where to get a duct reducer on another thread. The suggestion was a HVAC supply house but I do not know of any. Does anyone have any suggestions between Raleigh and Hickory. I will be traveling home today from Raleigh and Hiclory down I-40...
  20. b4man

    HVAC Contractor in Charlotte Area

    Do any of you know any good, reliable and reputable Heating and Air companies in the area? I need to replace my system at Lake Norman:crybaby2: Is anyone here in this business? I need some guidance and some A/C! Thank You in advance.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top