feeder

  1. Bluebird feeder

    Bluebird feeder

    Bluebird feeder.
  2. GarageWoodworks

    G&G Raised Dog Feeder

    Hey Gang! I just finished this G&G style dog feeder. It is made from cherry w/ ebony plugs and splines. It is finished with several coats of sprayed poly (hvlp). Thanks for looking. I made a video detailing how I made the 'indent detail'. You can see it here...
  3. feeder

    feeder

    ceder and plywood glue up and turn
  4. feeder

    feeder

    ceder and plywood glue up and turn
  5. feeder

    feeder

    ceder and plywood glue up and turn
  6. feeder

    feeder

    ceder and plywood glue up and turn
  7. feeder

    feeder

    ceder and plywood glue up and turn
  8. feeder

    feeder

    ceder and plywood glue up and turn
  9. M

    Planer feeder sudden failure

    Yesterday while planing a 12 inch 8' piece of 4 quarter cherry my Delta 15" 10yr old planer quit being able to advance the piece. i have completely taken it down and recallibrated all things and now discover that the gear drive has ceased to turn the infeed roller. since taking apart the gear...
  10. WoodWrangler

    Bandsaw Power Feeder Installation

    Last week Curt (woodydiver) so graciously came by and installed a phase converter and variable speed controller for the power feeder. Thanks Curt! :icon_thum I owe you one! Today was the day ... after the Invicta jointer pickup (for Travis, not me) ... Scott & Travis came by my place...
  11. Chipper

    TS Power feeder ??

    I have a small Delta PF, the one with the ball and socket mount. I'd like to use it on my table saw but my contractor saw doesn't have much table behind the blade. Is it different on a unisaw or shoud I be pushing with the feeder vs. pulling.
  12. William Roscoe

    installing a power feeder

    I'm trying to attach a 1 HP powerfeeder on the back surface of my shaper. The cast iron table on the shaper is about 27" square and if I attach the feeder to the rear corner, I'm afraid the fence attachment will bump into it when the fence needs to be pushed back. I thought about adding a piece...
  13. nelsone

    Quick Bird Feeder

    Here's a quick bird feeder I threw together a few days ago. My cats have missed seeing their birds so I had to get a new one made!
  14. Sharp Blade

    The Dog feeder is finished!

    Here it is in it's original design! The first photo is before the Danish Oil, the next one is after two coats.

Our Sponsors

LATEST FOR SALE LISTINGS

Top