drilling

  1. jimwill48

    Pen Drilling Vise Wanted

    Not sure if this is the proper forum but I thought this would get lost in the Buy/Sell section and it is Turning related. :eusa_whis Does anyone have a PSI, Woodcraft or ??? pen drilling vise they no longer use and want to get rid of at a reasonable price? I have been using a regular drill...
  2. J

    Drilling on Lathe Help?

    Can someone provide me with some good information on drilling on the lathe.....I am having issues when I try to do this. I've always drilled everything out on the drill press, but would like things to be a little more precise at times. I chuck up my blank, and have my drill chuck in the tail...
  3. MikeH

    Drilling problem...or should I say redrilling problem

    So tonight I decided to put together the mobile base my wife gave me for my birthday. It turned out pretty good, but how do you screw up drilling 8 holes in a piece of plywood? Well let me show you: If you look at the pic above you can see just how a hole can be screwed up. The...
  4. Canuck

    Drilling Countersink in T-Track

    Hi all, While working a universal tablesaw jig (that Joe - Bladeburner shared with us a couple weeks back) I found that one of my greatest challenges was drilling and countersinking the additional holes required to fasten the t-track to the base. I found these 82 degree countersink bits for #4...
  5. Wine Cellar WIP - Drilling 1

    Wine Cellar WIP - Drilling 1

    Fixture for drilling bottle cleats (176 cleats with 2 holes in each)
    • McRabbet
    • Media item
    • drilling project wine
    • Comments: 0
    • Album: Wine Cellar
  6. Wine Cellar WIP - Drilling 2

    Wine Cellar WIP - Drilling 2

    One down, just 175 to go!
    • McRabbet
    • Media item
    • drilling project wine
    • Comments: 0
    • Album: Wine Cellar
  7. Splinter

    European Hinge Drilling Jig.

    This is a European Hinge Drilling Jig I made a couple of years ago based on a plan in the December 2003 Workbench magazine. It is made from 3/4" MDF. I added the drill bit alignment guide. This was not part of the plan. I sent the magazine a photo and explanation of the jig with the bit guide...
  8. sapwood

    Shelf Pin drilling

    I had no problem setting up jig (pegboard) to space holes for shelf pins. However, I did have problem with controlling hole depth. I used these stop collars. Woodworker Supply cheapos However, in my experience there are worth less than the $2.99 selling price :crybaby2:Sizes aren't marked on...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top