I am currently building an oak frame for a bathroom mirror. In the frame I will be inlaying colored epoxy. The oak frame and the groove for the epoxy will be painted brown. The epoxy I plan to pour in will likely be tinted light blue or I may stay with clear. Does anyone have a experience...
I recently purchased a used Grizzly G1018 jointer. Right now it's completely disassembled for cleaning and awaiting a few new parts to fine tune it. I now have decided to re-paint the stand and jointer prior to reassembly. Has anyone out there with an older Grizzly tool (approx 1995-2000)...
I am getting dangerously close to the end of my wide dresser project and have laid down the first coat of platina shellac to seal everything off. I also plan to add 1-2 coats of orange shellac for some warming effect but I need to know if I can then top-coat that with the platina for depth...
Is color across different shellac sellers pretty consistent, or is there likely to be noticeable color differences between say J.E. Moser orange shellac and Shellac Finishes' orange shellac? I realize it is a natural product so there probably is differences just between batches of the same...
Hey folks,
I've got 2 commission walnut side tables I'm finishing up and was wondering if you could help me with some staining/color matching.
Here's the bases:
View image in gallery
Here's the 2 tops:
View image in gallery
View image in gallery
You can see that the...
I have a straight forward project that requires me to do some color matching - makes the new parts the same color and finish as the old parts.
In this case I could take the piece to the paint/stain place to be scanned, so I may actually do that.
What if I could not scan an existing piece...
Thought I'd put this up for ideas, comments, or whatever may come.
I've just started working with the first piece of Purple Heart I've played with. I notice that when cut, the exposed surfaces are actually somewhat brown, and it appears that over the next hours to a day, the purple color...
Yep - guys take warning... A few years ago I bought my wife a small little estwing hammer which I nicknamed the girly hammer, she was complaining that my 28oz hammer was to heavy for her to use. She liked the girly hammer BUT she said it's not pink :roll: So I said if I ever see a pink handled...
Owning the store gives us access to lots of great wood many displaying fantastic colors that fade over time (camphor burl, red mallee burl, and the more common purple heart, yellow heart, padauk) . Does anyone have any suggestions for finishing to keeping these colors vivid? We mostly turn but...
Another comment from sediener with off-color intimations...
http://www.ncwoodworker.net/forums/f30/show-me-your-chisel-racks-16134/
I think that if this is a family site as Steve suggests, he shouldn't be making this kind of "joke"
Ray
Hello all,
i have posted a couple if pics of the bookcase i am working on and the bed rail i am trying to match. I put a base coat of oil based stain (ipswich pine) and was looking for some pointers on what type of sealer i should use. it is going in my daughters bedroom. i read a couple of...
Hello,
I built a book case out of select pine and hardwood plywood. It is my first attempt at a complete book case. it hasent turned out too bad.
Now i am trying to match the color to an existing bed frame. I believe the existing furniture was finished with a polyshade finish over pine.
I didnt...
Happened to be reading Sept 2006 issue of Wood last night before going to sleep and on page 54 there is an article about using toner to blend or match finished colors. Seemed to be pretty good, although I have not used any of the products from Mixol but seems to be the same basic principle about...