This Intarsia Duck was a joint venture (My sweet lady, and myself worked together on this one), and it was the first go at the intarsia craft for both of us. Here are pictures of it before and after finishing (It is still wet in the picture, it is actually a satin finish). We made this last year...
This Intarsia Duck was a joint venture (My sweet lady, and myself worked together on this one), and it was the first go at the intarsia craft for both of us. Here are pictures of it before and after finishing (It is still wet in the picture, it is actually a satin finish). We made this last year...
Hey folks.
I have some case work that I need to do, so I need some nice ply.
Looking for black walnut and qs red oak plywood.
Anyone know where the best place to get this from coming from the Fayetteville/Eastover area?
Thanks in advance.
MAc
Here's a steal - 6 walnut boards for $96 bucks
Dimensions are as follows:
#1 13w x 1 1/4 t x 62
#2 12w x 7/8 t x 72
#3 12w x 1 t x 108
#4 12w x 7/8 t x 108
#5 12w x 7/8 t x 108
#6 12 w x 1 t x 108
#3 and 4 are flitch cut sequentials as are #5 and #6
These dimensions...
Does anyone know of a source for seasoned Black or Lombardy poplar in 10-12/4 thickness slabs approx. 18-20" wide x 4' long? I'm specific about the black / Lombardy variety, not the common tulip poplar ( I've got plenty of that right in the backyard!).I'm getting ready to build another upright...
First off, Hello!
I have been lurking for awhile, well, since I cut down a large walnut in the backyard, and it's' been drying for over 2 years in my basement. I finally took two of the boards and had them planed and glued, sanded..Been using the Watco Danish Oil to finish.
I am making a...
Man I'm so ticked. I got home last night from my parents house for Thanksgiving and was heading right to bed. Wile shutting down my PC I noticed that the Table Saw I wanted from HD was on sale for 25% off!
Got up this morning and was ready to buy it but the promotional code didn't work...
NOT MINE. NO CONNECTION.
For those near a Tractor Supply Store (TSS) they have their 4'x6'x 3/4 rubber stall mats on sale for $29.99. I cut them into 4'x2' sections. They make great mats for putting by stationary tools and benches. Unlike the the interlocking mats you get at the BORG these...
I have a few pieces of black walnut log rough cut with a chain saw about 12 or 14 inches long, and I would be willing to trade 2 or 3 of them for a few lathe lessons. I have used a lathe a little bit, but not much and have had no training. I want to learn to turn well enough to make some finials...
A friend has several acres of hardwood and invited me to come get some BW. He has a lot of standing BW and I brought back more than a Walmart bag of nuts which I will enjoy eating. I also brought back a log that has been on the ground for more than 15 years. The wood is solid. The log is 10' 5"...
Here's an idle question: is it easy to MIG (actually flux-core wire-weld) common black pipe ? I assumed black-pipe was mild steel, but maybe its really more cast-iron-like ?
No, I don't plan on using this for gas-piping..I'm planning to make a large cross-dowel aka barrel nut by tack-welding a...