Waterlox Application

Status
Not open for further replies.

JohnsonMBrandon

New User
Brandon Johnson
For those waterlox users out there. Can you guys provide any information on how you typically apply it.

I really like the finish that Steve D obtained on his cherry countertop. If someone can help me out let me know. How many coats, what formula, all that good stuff.
 

BobN

New User
Bob
I used a soft cotton rag and wipe it on. First 2 coats I put on fairly heavy, the rest I put on real thin. I sand very lightly between coats and usually put 5 or 6 coats on.

Can't really say if this is the right way or not, but it has worked for me for a lot of years.

Bob
 

BobN

New User
Bob
I use one of the little foam blocks that I get at ACE Hardware for the sanding between coats. I used the light gray one, I believe it's labeled extra fine.

If I was to use regular sand paper I would probably use 320 or 0000 steel wool.

Bob
 
Status
Not open for further replies.

Our Sponsors

LATEST FOR SALE LISTINGS

Top