here is the next pair of doors in process, this pair is for the shop entry. They are mahogany veneered over Spanish cedar stave cores, 8' tall x 2 1/4" thick
those look great, I love the hinges!
I would appreciate the resource - I like them!
Stuart
I bought the parts all separately and found it was cheaper than using many of the "custom strap" retailers. I wound up using an 8" threaded bolt pin and a 3 hole strap to match. I wanted one bolt carriage bolt thru the stile and 2 bolts in the rail. All of the rails are full tenon.
https://www.hardwareworld.com/pc4437m/Bolt-Hook-Zinc-5-8-x-8
https://www.hardwareworld.com/p5gdu45/Screw-Hook-Strap-Hinge-Zinc-Plated-Steel-10
This is the hardware supplier out in Wash state I think it was. You can call and they will help you if you have questions. I strongly encourage you to use the nut threaded pin rods and not the lag bolt type. Its so easy to get these just right.
good luck