I have a 2HP DC unit which I added a larger Rikon fan to in order to create more suction. I am aware this causes more draw on startup - but not sure how much.
I currently have it running just fine on a dedicated 110v 20Amp Circuit.
I recently bought a Jet remote start kit that is supposed to handle 115v 20amp, BUT every time I use the remote to start it the whole thing trips and shuts off.
The only thing I was thinking is that the specs for the device says it only handles up to 1 3/4HP systems. Seems that with what I have already running on a smaller voltage and same amperage this should still work for me. So am I missing anything in my setup that would be causingthis device to possibly be overloaded?
I currently have it running just fine on a dedicated 110v 20Amp Circuit.
I recently bought a Jet remote start kit that is supposed to handle 115v 20amp, BUT every time I use the remote to start it the whole thing trips and shuts off.
The only thing I was thinking is that the specs for the device says it only handles up to 1 3/4HP systems. Seems that with what I have already running on a smaller voltage and same amperage this should still work for me. So am I missing anything in my setup that would be causingthis device to possibly be overloaded?
Jet RF Remote Control / Dust Collector
Klingspor's Woodworking Shop is full line distributor of woodworking tools and supplies from respected companies like Klingspor Abrasives.
www.woodworkingshop.com