I recently joined the forum to take the next step in my progress. I started out about 2 years ago moving into a new house and receiving a pile of scrap 1x10 from work. Sorted it, burned a lot, and have kept some.
Built a few rough bed frames from the infamous Ana White and then recently finished a table I drew up myself (castle joints left proud, haunched breadboard ends); stain before filling knots with epoxy! I have been working exclusively with pine until I can improve but will be looking to move into hardwoods and continue amassing tools.
Running off the Kobalt 10" Jobsite Table Saw, Hitachi 10" Non-slider Miter Saw, Bosch 1617 router, and luckily picked up the trusty Dewalt 735X this last Black Friday. I have been fortunate to borrow a few neighbor's tools and I have been tracking Craigslist for deals. I'll be lurking and may post from time to time! Thanks
Built a few rough bed frames from the infamous Ana White and then recently finished a table I drew up myself (castle joints left proud, haunched breadboard ends); stain before filling knots with epoxy! I have been working exclusively with pine until I can improve but will be looking to move into hardwoods and continue amassing tools.
Running off the Kobalt 10" Jobsite Table Saw, Hitachi 10" Non-slider Miter Saw, Bosch 1617 router, and luckily picked up the trusty Dewalt 735X this last Black Friday. I have been fortunate to borrow a few neighbor's tools and I have been tracking Craigslist for deals. I'll be lurking and may post from time to time! Thanks