I am currently trying to match the stain on the treads I just put down in my house. Here's what's going on:
1. I decided to prefinish the stair treads before I put them down. I used rustolum classic cherry oil based from lowes btw with oil based poly on top.
2. I countersunk screws and pegged the holes. Then sanded to bare wood.
3. Using the same stain I have gone over the spots a few times but only a few have matched well. Cleaned with mineral spirits between coats.
What can I do?
Thanks,
Ryan
1. I decided to prefinish the stair treads before I put them down. I used rustolum classic cherry oil based from lowes btw with oil based poly on top.
2. I countersunk screws and pegged the holes. Then sanded to bare wood.
3. Using the same stain I have gone over the spots a few times but only a few have matched well. Cleaned with mineral spirits between coats.
What can I do?
Thanks,
Ryan